International Surface Air Lift® (ISAL®) service is a bulk mailing system that provides fast, economical international delivery of First-Class Mail International items. The price is lower than for First-Class Mail International service. ISAL shipments are flown to the foreign destinations and entered into that country’s surface or nonpriority mail system for delivery. Separate prices are provided for International Service Center (ISC) drop shipments, presorted mail, and nonpresorted mail. Volume incentives are available through customized agreements.
With the exception of M-bags (see 261.23), ISAL mailpieces are sealed against inspection.
ISAL M-bags (direct sacks of printed matter to one addressee) may be entered in conjunction with an ISAL mailing, are subject to the provisions of 260, and may be sent to all destination countries that are referenced in Exhibit 293.452. When using this method of mail preparation, the sender must complete PS Tag 155, Surface Airlift Mail, and PS Tag 158, M-bag Addressee Tag. Tags must be securely attached to the neck of the sack.
To qualify for ISAL service, a mailpiece must meet the First-Class Mail International characteristics as defined in 141.5. Mailpieces do not have to be of the same size and weight to qualify. Any item sent with ISAL service must conform to the weight and size limits for First-Class Mail International postcards, letters, large envelopes (flats), and packages (small packets) as described in 240.
ISAL service is available to all the foreign countries that are listed in Exhibit 293.452, which shows the price group assigned to each country.
All mailings must meet a minimum weight quantity of 50 pounds. To achieve the 50-pound minimum, mailings may include a combination of presort mail, worldwide nonpresort mail, or M-bags.
Only a direct country sack containing a minimum of 5 pounds qualifies for the presort price. All remaining mail must be prepared and paid at the worldwide nonpresort price.
Only a direct country sack containing a minimum of 5 pounds or a mixed country sack containing a minimum of 5 pounds qualifies for the presort price. All remaining mail must be prepared and paid at the worldwide nonpresort price.
Dutiable items may be sent in accordance with the applicable rules in this subchapter for each respective category of mail. Priority Mail International items, either ordinary or insured, may not be mailed with ISAL service.
See 123 for customs forms requirements.
Extra services are not available for items sent with ISAL service.
ISAL service has two price options: a presort price with 15 price groups (Exhibit 293.31a), and a worldwide nonpresort price (Exhibit 293.31b). Both options offer full service prices (Exhibit 293.31c) for mail deposited at offices other than the drop shipment offices listed in 293.532, and drop shipment prices (Exhibit 293.31d) for mail deposited at one of the drop shipment offices. The per-piece price and per-pound price are shown in Exhibit 293.31a and Exhibit 293.31b. The per-piece price applies to each piece regardless of its weight. The per-pound price applies to the net weight (gross weight minus tare weight of sack or tray) of the mail for the specific price group. Fractions of a pound are rounded to the next whole pound for postage calculation.
Exhibit 293.31a
ISAL Prices — Direct Country Sacks and Mixed Country Sacks
Exhibit 293.31b
ISAL Prices — Worldwide Nonpresort Sacks
Exhibit 293.31c
ISAL M-bag Prices — Full Service
Exhibit 293.31d
ISAL M-bag Prices — ISC Drop Shipment
Postage is computed on PS Form 3700, Postage Statement — International Mail.
Compute postage at the worldwide nonpresort price as follows:
- Multiply the number of pieces in the mailing by the applicable per-piece price.
- Multiply the net weight (in whole pounds) of the entire mailing by the applicable per-pound price.
- Add together the two totals in steps 1 and 2.
Compute postage at the presorted price as follows:
- Multiply the number of pieces in the mailing destined for countries in a specific price group by the appropriate per-piece price.
- Multiply the net weight (in whole pounds) of those pieces by the corresponding per-pound price.
- Add together the two totals in steps 1 and 2.
Postage must be paid by postage meter, permit imprint, or precanceled stamps (see DMM 604).
Payments made by postage meter are subject to the following standards:
- Piece Price. The applicable per-piece postage shown in Exhibit 293.31a or Exhibit 293.31b must be affixed to each mailpiece when paying with a meter. A mailer who has an ICM agreement must affix the applicable per-piece postage as set forth in the ICM agreement.
- Pound Price. Postage for the pound price portion must be paid either by meter stamp(s) attached to the postage statement or from the mailer’s authorized permit imprint advance deposit account.
- Postage Endorsement. Each piece must be legibly endorsed with the words “INTERNATIONAL SURFACE AIR LIFT” or ”ISAL.”
- Specifications for Endorsement. The endorsement required in 292.332c must appear on the address side of each piece and must be applied by a printing press, hand stamp, or other similar printing device. It must be printed either above the name of the addressee and to the left or below the postage, or adjacent to the meter stamp in either the postal inscription slug area or ad plate area. If the postal endorsement appears in the ad plate area, no other information may be printed in the ad plate. The endorsement may not be typewritten or hand-drawn. The endorsement is not considered adequate if it is included as part of a decorative design or advertisement.
- Unmarked Pieces. Unmarked pieces lacking the postage endorsement are subject to the First-Class Mail International single-piece price.
- Drop Shipment of Metered Mail. A mailer who wants to enter metered ISAL mail at a Post Office facility other than where the meter is licensed must obtain a drop shipment authorization. To obtain an authorization, the mailer must submit a written request to the postmaster at the office where the mail will be entered (see DMM 705).
Payments made by precanceled stamps are subject to the following standards:
- Piece Price. The same denomination of stamp must be affixed to every piece in the mailing.
- Pound Price. Additional postage is paid at the time of mailing by advance deposit account or meter stamp affixed to the back of the accompanying postage statement.
- Postage Endorsement. Each piece must be legibly endorsed with the words “INTERNATIONAL SURFACE AIR LIFT” or ”ISAL.”
- Specifications for Endorsement. The endorsement required in 293.333c must appear on the address side of each piece and must be applied by a printing press, hand stamp, or other similar printing device. It must be printed either above the name of the addressee and to the left or below the postage, or adjacent to the precanceled stamp. The endorsement may not be typewritten or hand-drawn. The endorsement is not considered adequate if it is included as part of a decorative design or advertisement.
- Unmarked Pieces. Unmarked pieces lacking the postage endorsement are subject to the First-Class Mail International single-piece price.
Mailers may use a permit imprint for mailings that contain identical weight pieces. Any of the permit imprint formats shown in 152.44 is acceptable but must include the “INTL SURFACE AIR LIFT” rate marking. Postage is calculated as described in 293.32 and is deducted from the mailer’s advance deposit account. Permit imprints must not denote bulk mail, nonprofit, or other domestic or special mail. Mailers may use permit imprint with nonidentical weight pieces only if authorized to use postage mailing systems under DMM 705.
ISAL service is subject to the addressing requirements contained in 122.
- Exception — Canada: ISAL items destined for Canada must have the applicable alphanumeric postcode included in the delivery address. See 122.1k for the address formatting requirements that generally apply to mailpieces sent to Canada.
- Exception — Direct Country Sacks: ISAL items in direct country sacks (see 293.461) are not subject to the interline addressing requirement that is specified in 122.1d. At the sender’s risk, the English translation of the destination post office or city name may be omitted from an address that is printed in Russian, Greek, Arabic, Hebrew, Cyrillic, Japanese, or Chinese characters. An English translation of the country name (for example, Japan) is still required on the individual mailpieces.
The sender should mark “INTERNATIONAL SURFACE AIR LIFT” or “ISAL” on the address side of each piece. Use of bordered airmail envelopes is prohibited.
Items that might be mistaken for another class of mail because of their size, weight, or appearance should be marked “LETTER-POST” on the address side.
Mail that is sent via ISAL service may be sealed at the sender’s option. See 244.4 for the packaging methods that are applicable to all First-Class Mail International items.
Exception: For direct country sacks only, First-Class Mail International folded mailpieces, without envelopes, are admissible provided one of the following methods is used:
- All of the open sides are secured with tape, tabs, or wafer seals of sufficient quantity and strength to prevent the mailpieces from opening or being damaged during postal handling.
- The mailpieces meet the physical standards and tabbing requirements in DMM 201.3.
The following standards apply:
- Thickness. Bundles of letter-size mail should be no thicker than approximately a handful of mail (4 to 6 inches thick). Bundles of flat-size mail may be thicker than 6 inches but must not weigh more than 11 pounds.
- Securing Bundles. Each bundle must be securely tied to withstand normal transit. Placing rubber bands around the length and then the girth is the preferred method of securing bundles of letter-size mail. Plastic strapping placed around the length and then the girth is the preferred method of securing bundles of flat-size mail.
- Separation of Bundles. Letter-size and flat-size mail must be bundled separately.
- Facing of Pieces. All pieces in bundles must be faced in the same direction.
Follow these steps when preparing ISAL presort mail:
- Full Service. For presort mailings, all mail that is addressed to an individual country and that contains 5 pounds or more must be sorted into direct country bundles and sacked in direct country sacks. Mail that cannot be made up into direct country sacks must be prepared and entered at the worldwide nonpresort price.
- ISC Drop Shipment. For presort mailings, all mail that is addressed to an individual country and that contains 5 pounds or more must be sorted into direct country bundles and sacked in direct country sacks. All mail that is addressed to individual countries within a single price group and that contains 5 pounds or more must be bundled separately and sacked in mixed country sacks. Mail that ultimately cannot be made up into direct country sacks or mixed country sacks must be prepared and entered at the worldwide nonpresort prices.
293.452 Presorted Mail — Direct Country Bundle Label
A label (facing slip) for direct country bundles prepared for mixed county sacks must be completed and placed on the address side of the top piece of each bundle showing the country of destination.
Note: The pressure-sensitive labels and optional endorsement lines used domestically for presort mail are prohibited for ISAL.
Exhibit 293.452
ISAL Country Price Groups and Foreign Exchange Offices
ISAL mail paid at the worldwide nonpresort price must be made into bundles as defined in 293.44. Letters and flats must be bundled separately, although nonidentical pieces may be commingled within each of these categories. Pieces that cannot be bundled because of their physical characteristics must be placed loose in the sack and do not require labeling (facing slips).
The following standards apply:
- General. When there are 5 pounds or more of mail addressed to the same country, the mail must be enclosed in a direct country sack. All types of mail, including letter-size bundles, flat-size bundles, and loose items, can be commingled in the same sack for each destination and counted toward the 5-pound minimum. The maximum weight of the sack and contents must not exceed 66 pounds.
- Direct Country Sack Tags. Direct country sacks must be labeled with PS Tag 155, Surface Airlift Mail, which identifies the mail to ensure it receives priority handling. PS Tag 155 must show the destination country, and the mailer must specify the price group on the back of PS Tag 155.
- Direct Country Sack Label. The sack label must be completed as follows (see Exhibit 293.462 for the list of U.S. Exchange Offices):
Line 1: Appropriate U.S. Exchange Office and Routing Code
Line 2: Contents — DRX COUNTRY
Line 3: Mailer, Mailer Location
Example:
The following standards apply:
- General. When mail is prepared under the ISC drop shipment option, direct country bundles destined to a specific country that cannot be made up in direct country sacks must be prepared in a mixed country sack. A mixed country sack must be prepared for each price group. Only countries in price groups 11 through 15 are eligible for this price. The maximum weight of the sack and the contents must not exceed 66 pounds.
- Mixed Country Sack Tags. Mixed country sacks must be labeled with PS Tag 155, Surface Airlift Mail, which identifies the mail to ensure it receives priority handling. The mailer must specify the price group on the back of PS Tag 155.
- Mixed Country Sack Label. The sack label must be completed as follows (see Exhibit 293.462 for the list of U.S. Exchange Offices):
Line 1: Appropriate U.S. Exchange Office and Routing Code
Line 2: Contents — DRX MIXED
Line 3: Mailer, Mailer Location
Example:
Exhibit 293.462
Labeling of ISAL Mail to Postal Service Exchange Offices
ISAL Acceptance Office
3–Digit ZIP Code Prefix
|
U.S. Exchange Office and Routing Code for Line 1
|
004–005, 010–089, 100–268, 270–297, 400–418, 420–427, 470–471, 476–477
|
ISC NEW YORK NY 003
|
006–009, 298–339, 341–342, 344, 346–347, 349–397, 399
|
ISC MIAMI FL 33112
|
424, 430–469, 478–516, 520–528, 530–531, 534–535, 537–567, 570–588, 600–620, 622–631, 633–641, 644–658, 660–662, 664–681, 683–693, 700–708, 710–799, 885
|
ISC CHICAGO IL 60290
|
590–599, 821, 832–838, 970–986, 970–999
|
AMC SEATTLE WA 980
|
800–816, 820, 822–831, 840–847, 893–898, 937–961
|
ISC SAN FRANCISCO CA 94013
|
850, 852–853, 855–857, 859–860, 863–865, 870–875, 877–884, 889–891, 900–908, 910–928, 930–936
|
ISC LOS ANGELES CA 900
|
967–969
|
P&DC HONOLULU HI 967
|
The following standards apply:
- General. The working bundles of mixed country mail and loose items must be enclosed in sacks unless other equipment is specified by the acceptance office. Nonpresorted letter-size mail may be presented in trays if authorized by the acceptance office. The maximum weight of the sack and the contents must not exceed 66 pounds.
Note: Working bundles of mixed country mail cannot be enclosed in mixed country sacks.
- Worldwide Nonpresort Sack Tags. Sack tags for worldwide nonpresort sacks must be labeled with PS Tag 155, Surface Airlift Mail, which identifies the mail to ensure it receives priority handling. The mailer must specify “WW" (for “worldwide”) on the back of PS Tag 155.
- Worldwide Nonpresort Mail Sack Label. The sack label must be completed as follows (see Exhibit 293.462 for the list of U.S. Exchange Offices):
Line 1: Appropriate U.S. Exchange Office and Routing Code
Line 2: Contents WKG
Line 3: Mailer, Mailer Location
Example:
The mailer must specify the price group on the back of PS Tag 155 (for example, with “1” for Canada or “WW” for worldwide nonpresort) and must physically separate the sacks by price group at the time of mailing.
Mailings must be deposited at a Post Office facility where bulk mail is accepted and where the mailer holds an advance deposit account or postage meter license.
To qualify for the drop shipment price, mailers must present the mail to one of the locations in 293.532. The mailer must pay postage at the drop shipment location either through an advance deposit account or postage meter license at the serving Post Office facility. As an alternative, mailers who are participating in the plant-verified drop shipment (PVDS) program may have the mail verified, accepted, and paid for at the mailer’s plant or at the origin Post Office facility serving the mailer’s plant if authorized under DMM 705. PVDS mail must be transported by the mailer to the drop shipment location, and the mail must be accompanied by PS Form 8125, Plant-Verified Drop Shipment (PVDS) Verification and Clearance.
Drop shipments are available through the following offices:
New York:
JOHN F KENNEDY AIRPORT MAIL CTR
US POSTAL SERVICE
JOHN F KENNEDY INTERNATIONAL AIRPORT BLDG 250
JAMAICA NY 11430-9998
Florida:
MIAMI INTERNATIONAL SERVICE CTR*
US POSTAL SERVICE
11698 NW 25TH ST
MIAMI FL 33112-9997
MIAMI PROCESSING AND DISTRIBUTION CTR
US POSTAL SERVICE
2200 NW 72ND AVE
MIAMI FL 33152-9997
Texas:
north texas p&dc
us postal service
951 w bethel rd
coppell tx 75099-8811
Illinois:
JT WEEKER INTERNATIONAL SERVICE CENTER
US POSTAL SERVICE
OHARE INTERNATIONAL AIRPORT
514 EXPRESS CENTER DR
CHICAGO IL 60688-9998
California:
LOS ANGELES ISC
US POSTAL SERVICE
5800 w century blvd
los angeles ca 90009-9998
SAN FRANCISCO ISC
US POSTAL SERVICE
2650 BAYSHORE BLVD
DALY CITY CA 94013-1631
*Only plant-verified mail is transported to this facility by the mailer.
