QSG 240d Commercial Letters and Cards - Standard Mail Carrier Route L

ARCHIVED QSG - JAN 17, 2016

	USPS Home \| Postal Explorer Home

Quick Service Guide 240d

Commercial Letters and Postcards

Standard Mail Carrier Route Letters
January 17, 2016
Printer-Friendly PDF

For pieces that weigh more than 3.3 but not more than 3.5 ounces, see 243.1.3. For pieces that are not automation compatible, or not barcoded, or for pieces weighing more than 3.3 ounces, see 243.1.3 (Regular and Nonprofit).

There are no Standard Mail card prices; cards may be mailed at the letter prices.

Destination discounts (243.1.0) apply to mail prepared as prescribed by USPS and addressed for delivery within service area of destination NDC/ASF or SCF (246.2.0).

Annual presort mailing fee applies.

Content (243.2.0)

Letters containing mailable items not required to be sent using First-Class Mail can be sent using Standard Mail. Standard Mail is typically used for advertisements and flyers. Additional content restrictions must be met for authorized nonprofit mailers (703.1.0).

Eligibility Standards (243.6.0)

Mailings of 200 or more addressed pieces, sorted and marked as described below. Pieces are eligible if not required to be mailed at First-Class Mail prices or not eligible for Periodicals prices. Nonprofit prices require specific authorization (703.1.0). Pieces must be part of a group of 10 or more to one carrier route, prepared in line-of-travel or walk sequence. Pieces that are not automation compatible or that do not have a Delivery Point barcode or Intelligent Mail barcode are mailable only as nonautomation carrier route letters (exceptions apply to pieces with simplified addresses). DDU discounts are not available for letter-size pieces.

Carrier route information updated using CASS-certified process within 90 days before mailing.

High-density, saturation, and basic letter-price mail subject to address standards in 243.7.6, barcode quality standards in 708.4.0, and CASS/MASS standards in 708.3.0.

Mailers can apply Repositionable Notes for an additional charge. See 202.7.0.

Addresses on all pieces must be updated within 95 days before mailing through a USPS-approved address update method (e.g., ACS, NCOA^Link, or the appropriate ancillary service endorsement (except Forwarding Service Requested) under 507.1.5.3). For an overview of the Move Update standards, see Quick Service Guide 602a.

Postage Payment and Documentation (244)

Precanceled stamp (604.3.0), meter (604.4.0), or permit imprint (604.5.0).

Additional standards apply to mailings of nonidentical-weight pieces.

Documentation:

Postage statement:

Regular: PS Form 3602-R, or approved facsimile.

Nonprofit: PS Form 3602-N, or approved facsimile.

Supporting documentation: required unless correct price is affixed to each piece or unless each piece is of identical weight and separated by price when presented for acceptance; documentation generated by PAVE-certified software (or printed in standardized format).
Additional documentation to support density standards (245.6.9).

Mail Preparation (245.6.0)

Marking on each piece in the postage area (202.3.0):

Regular: “Presorted Standard” or “PRSRT STD,” “Standard” or “STD.”
Nonprofit: “Nonprofit Organization” or “NONPROFIT ORG.” or “NONPROFIT.”
Basic, high-density, and saturation price pieces must also be marked “ECRLOT,” “ECRWSH,” or “ECRWSS,” respectively, in the correct optional endorsement line under 708.7.0 or in correct carrier route information line under 708.8.0, or postage area. Mailings consisting of bundles claimed at more than one enhanced carrier route price must bear appropriate marking for price claimed. Pieces not claimed at corresponding price must not be included in mailing and must not bear the “ECRLOT,” “ECRWSH,” or “ECRWSS” marking. For additional marking standards for carrier route pieces, see 708.8.0.

Basic price mail must be in line-of-travel (LOT) or in walk sequence (245.6.8).

High-density (WSH) and saturation (WSS) price mail must be in walk sequence (245.6.8).

Letter-size pieces that are claimed at nonletter prices must be marked, sorted, and trayed as letters.

Barcoded tray labels required (245.4.0). Use 2-inch tray labels for all letter-size pieces (245.4.0).

The mailer must retain required documentation in 708.3.5.2 for 1 year.

Trays must be sleeved and strapped (245.3.0). See 245.3.0 for exceptions to strapping for mailings that originate and destinate in delivery area of same SCF and for trays not processed at a NDC.

Enter and Deposit (246)

Mailing entered at an acceptance point designated by USPS.

Preparation


Preparation for Barcoded Automation-Compatible Letters 3 Ounces or Less (245.6.7)
Required for Saturation, High Density, and Basic barcoded and automation-compatible letter-size mail weighing up to 3 ounces. For all other mail, use the preparation on page three. At least 10 or more pieces to same carrier route (city route, rural route, highway contract route, post office box section, or general delivery unit); fewer than 10 pieces per route not permitted. Use an optional endorsement line or carrier route information line.

Carrier Route Trays: Required, full trays only for pieces to the same carrier route; overflow trays not permitted. Barcoded Labels: For Line 1, use city, state, and 5-digit ZIP Code on mail. For Line 2, use “STD LTR BC WSS” for saturation, or “STD LTR BC WSH” for high density, or “STD LTR BC LOT” for basic followed by route type and number. Price: Saturation, High Density, or Basic	5-Digit Carrier Routes Trays: Required, full trays when possible for pieces to the same 5-digit carrier routes; group pieces by carrier route; bundling not permitted. Overflow trays not permitted. Barcoded Labels: For Line 1, use city, state, and 5-digit ZIP Code on mail. For Line 2, use “STD LTR 5D CR-RT BC.” Price: Saturation, High Density, or Basic	3-Digit Carrier Routes Trays: Required, for any remaining pieces, group pieces by carrier route. Bundling required in less than full trays Barcoded Labels: For Line 1, use city, state, and 3-digit ZIP Code prefix shown in L002, Column A, for 3-digit ZIP Code prefix on mail. For Line 2, use “STD LTR 3D CR-RT BC.” Price: Saturation, High Density, or Basic
Bundling not permitted except for card-sized pieces.

1. For saturation pieces, use “WSS,” for high-density and high-density plus pieces, use “WSH,” for basic pieces, use “LOT.”


Preparation for Letters Over 3 Ounces and all Nonbarcoded or Nonautomation-Compatible Letters (245.6.6)
Bundle Preparation
Saturation 1 Bundles: 10 or more pieces addressed to same carrier route² must be prepared in bundles (unless placed in full carrier routes trays or placed in full 5-digit carrier routes trays); fewer than 10 pieces allowed only if route has fewer than 10 delivery stops. Mail must be in walk-sequence order (245.6.8) and meet density standards. Labels: Use optional endorsement line (OEL) stating carrier route description prefix and route number (708.8.0).⁴ Price: Saturation	High Density 3 Bundles: 10 or more pieces addressed to same carrier route⁴ must be prepared in bundles (unless placed in full carrier routes trays or placed in full 5-digit carrier routes trays). Mail must be in walk-sequence order (245.6.8) and meet density standards. Labels: Use OEL with carrier route description prefix and route number (708.8.0).² Price: High Density	Basic Bundles: 10 or more pieces addressed to same carrier route⁴ must be prepared in bundles (unless placed in full carrier routes trays or placed in full 5-digit carrier routes trays). Mail must be in line-of-travel or walk-sequence order (245.6.8). Labels: Use OEL with carrier route description prefix and route number (708.8.0).² Price: Basic

Tray Preparation
Carrier Route Trays: Required, full trays only for pieces to same carrier route; smaller quantities not permitted; bundling not required except for card-sized pieces. Labels: For Line 1, use city, state, and 5-digit ZIP Code of destination. For Line 2, use “STD LTR MACH” and “WSS” for saturation, “WSH” for high density, or “LOT” for basic followed by route type and number.⁵^,⁶	5-Digit Carrier Routes Trays: Required if full tray, optional with one 10-piece bundle. No minimum number of carrier route bundles for same 5-digit area. Labels: For Line 1, use city, state, and 5-digit ZIP Code of destination. For Line 2, use “STD LTR 5D CR-RT MACH.”⁵	3-Digit Carrier Routes Trays: Carrier route bundles only; optional with minimum one 10-piece carrier route bundle for each of two or more 5-digit areas. Labels: For Line 1, use city, state, and 3-digit ZIP Code prefix shown in L002, Column A. For Line 2, use “STD LTR 3D CR-RT MACH.”⁵

¹	Minimum 90% total active residential or 75% total active deliveries per route (100% if simplified address (243.6.0).

²	Carrier route includes city route, rural route, highway contract route, post office box section, or general delivery unit.

³	125-piece minimum per route (300-piece minimum for High-Density Plus) unless route has fewer than 125 deliveries (or 300 deliveries).

⁴	No facing slip or OEL required if the bundle is placed in a carrier route tray. Bundles in 5-digit carrier routes trays and 3-digit carrier routes trays must have a facing slip unless the pieces in the bundle show a carrier route information line or an OEL (245.6.4).

⁵	Use “BC” for trays containing barcoded, automation-compatible pieces over 3 ounces. Use “MAN” for trays containing nonmachinable pieces and trays containing simplified address pieces.

⁶	For saturation pieces, use “WSS,” for high-density pieces, use “WSH,” for basic pieces, use “LOT.”