ARCHIVED DMM
Contents Index

 

M900 Advanced Preparation Options for Flats

M930 Merged Palletization of Bundles Using a 5% Threshold

Summary

M930 describes the eligibility and preparation requirements for copalletizing bundles of automation, Presorted, and carrier route rate pieces into merged 5-digit scheme and merged 5-digit pallets using a 5% threshold (not the City State Product).

1.0 Periodicals

1.1Basic Standards

[6-10-04] Five-digit scheme bundles (under L007) must be prepared under M930. Five-digit scheme bundles may not be copalletized on merged pallets with carrier route bundles. Five-digit bundles from an automation rate mailing and 5-digit bundles from a Presorted rate mailing (including pieces cobundled under M950) may be placed on the same pallet as carrier route bundles under the following conditions:

a. A carrier route mailing must be part of the mailing job.

b. The pieces in the carrier route mailing, the automation rate mailing, and the Presorted rate mailing must be part of the same mailing job.

c. Pieces in the automation rate mailing must meet the criteria for a flat under C050.3.2 and C820. Pieces in the Presorted rate mailing and the carrier route mailing must be nonletter-size.

d. Automation rate 5-digit bundles, Presorted rate 5-digit bundles, and cobundled 5-digit bundles may be copalletized with carrier route bundles only when the pieces in the 5-digit bundles do not exceed the 5% limit described in 1.4. Pallets of mail sorted in this manner are called “merged 5-digit” pallets. Pallets of mail sorted in this manner for which scheme sortation is also performed are called “merged 5-digit scheme” pallets. Since 5-digit scheme bundles cannot be placed on merged pallets, pieces in 5-digit scheme bundles do not count as 5-digit sorted pieces for purposes of determining the 5% limit.

e. If sortation under this section is performed, merged 5-digit pallets and merged 5-digit scheme pallets must be prepared whenever there is enough volume of carrier route and 5-digit bundles under M041 and 1.4 to prepare such pallets. In addition, all possible merged 5-digit scheme and 5-digit scheme pallets must be prepared under 1.4 and 1.5.

f. The carrier route mailing must meet the eligibility criteria in E230, the automation rate mailing must meet the eligibility criteria in E240, and the Presorted rate mailing must meet the eligibility criteria in E220.

g. The rates are based on the level of bundle and the number of pieces in the bundle under E220, E230, and E240.

h. The bundles from each separate mailing must be sorted together on pallets (copalletized) under 1.5 using presort software that is PAVE-certified.

i. A complete, signed postage statement(s), using the correct USPS form or an approved facsimile, must accompany each mailing job prepared under these procedures.

j. In addition to the postage statement(s), documentation prepared by PAVE-certified software must be submitted with each copalletized mailing job that describes for each pallet sortation level and pallet the number of pieces qualifying for each applicable carrier route rate, each applicable automation rate, and each applicable Presorted rate under P012. A separate 5% threshold summary also must be provided under P012 for each “logical” merged 5-digit scheme or “logical” merged 5-digit pallet presort destination. This 5% threshold summary must show for each 5-digit ZIP Code on the logical merged 5-digit scheme or logical merged 5-digit pallet: the total number of pieces on the pallet for the 5-digit ZIP Code; the total number of pieces sorted in carrier route bundles for the 5-digit ZIP Code (including each firm bundle eligible for the carrier route rate and low-volume carrier route bundles); the total number of pieces sorted in 5-digit bundles for the 5-digit ZIP Code (including each firm bundle eligible for the 5-digit or basic rate and low-volume 5-digit bundles), and; of the total number of pieces for the 5-digit ZIP Code, the percentage of pieces sorted in 5-digit bundles for that 5-digit ZIP Code. This additional 5% threshold summary must appear within the body of the documentation beneath the pallet rate listing for the last physical pallet for the logical pallet presort destination. Note: If there are two or more physical pallets for the same presort destination, for example, the same merged 5-digit pallet destination, these two or more physical pallets would be considered as one “logical pallet.” The separate pallet summary must be for the mail on all of the physical pallets (the “logical pallet”) for that presort destination.

k. Portions of the mailing job that cannot be palletized must be prepared in sacks under M210, M220, M820, M910, or M920.

1.2Bundle Preparation

Bundles placed on pallets must be prepared under the standards in M045.

1.3Low-Volume Bundles on Pallets

Carrier route and 5-digit bundles prepared under M210, M220, M820 or M950, and M045 that contain fewer than six pieces may be placed on pallets under 1.5a through 1.5i, when the publisher determines that such preparation improves service. Pieces in such low-volume bundles must pay the applicable basic rate.

1.45% Threshold Standard

[10-6-04] Five-digit bundles and carrier route bundles may be placed on the same merged 5-digit scheme or merged 5-digit pallet under 1.5 if all of the following conditions are met:

a. Firm bundles claimed as one piece may be eligible for carrier route rates, 5-digit rates, or basic rates. Firm pieces (bundles), regardless of the rate claimed, are not subject to the 5% limit calculation. When firm bundles are placed on merged 5-digit scheme or merged 5-digit pallets, all eligible 5-digit bundles within the same logical bundle as the firm bundles must be merged, subject to the restrictions outlined in 1.4b through 1.4g, prior to merging any other 5-digit bundles.

b. The number of pieces prepared in 5-digit bundles for any single 5-digit ZIP Code on a “logical” merged 5-digit or merged 5-digit scheme pallet does not exceed 5% of the total number of pieces for the 5-digit ZIP Code on the logical pallet for that presort destination. That is, the total number of pieces for a 5-digit ZIP Code in 5-digit and carrier route bundles must not be greater than the number of pieces in carrier route bundles divided by 0.95.

c. The 5% threshold is calculated separately for each 5-digit ZIP Code. For example, if a scheme contains four different 5-digit ZIP Codes, a separate 5% threshold applies to each 5-digit ZIP Code for the scheme on a merged 5-digit scheme pallet. Since 5-digit scheme bundles may not be placed on merged pallets, pieces in 5-digit scheme bundles do not count as 5-digit sorted pieces for purposes of determining the 5% limit.

d. Except when bundles are prepared under the cobundling option in M950, all the mail in a logical 5-digit bundle must be able to be placed on the logical pallet under the 5% rule. A logical 5-digit bundle is all pieces for a mailing (rate level) prepared in a 5-digit bundle or bundles for the same 5-digit destination. For each 5-digit ZIP Code it is possible to have a logical 5-digit bundle of automation rate mail and a logical 5-digit bundle of Presorted rate mail. If the total number of pieces in a logical 5-digit bundle exceeds the 5% limit, none of the pieces for that 5-digit bundle level may be placed on a merged 5-digit or merged 5-digit scheme pallet. For some ZIP Codes, the total number of pieces prepared in logical 5-digit bundles (both an automation rate 5-digit bundle and a Presorted rate 5-digit bundle) may exceed 5% of the total mail for that ZIP Code, but the number of pieces for an individual automation rate logical 5-digit bundle for that ZIP Code does not exceed the 5% limit nor does an individual Presorted rate logical 5-digit bundle for that ZIP Code exceed the 5% limit. In such instances, mailers may choose to place all of the pieces in a logical 5-digit bundle for a single rate category on the logical merged 5-digit or merged 5-digit scheme pallet so that the 5% threshold is not exceeded.

e. Except for bundles prepared under the cobundling option in M950, if the total number of pieces in both the logical 5-digit automation rate bundle and the logical 5-digit Presorted rate bundle each separately exceed 5% of the total number of pieces for the 5-digit ZIP Code, none of the pieces in 5-digit bundles may be merged with carrier route bundles on a merged 5-digit or merged 5-digit scheme pallet.

f. For mailing jobs prepared using the cobundling option in M950, if the total number of pieces prepared in a logical 5-digit bundle exceeds the 5% limit for a 5-digit ZIP Code in 1.4b, a mailer may, for each 5-digit ZIP Code, choose to place a portion of the pieces prepared in the logical 5-digit bundle on a merged 5-digit or 5-digit scheme pallet using one of the options below. Regardless of the option selected, a minimum of six pieces must be prepared in 5-digit bundle(s) placed on the merged pallet and a minimum of six remaining pieces prepared in 5-digit bundle(s) not placed on the merged pallet, with the total number of pieces not exceeding the 5% limit. The options are:

(1) Place either all automation rate pieces or all Presorted rate pieces for the 5-digit ZIP Code on the merged pallet.

(2) Place a portion of either the automation rate pieces or the Presorted rate pieces for the 5-digit ZIP Code on the merged pallet.

(3) Place either all the automation rate pieces plus a portion of the Presorted rate pieces or all the Presorted rate pieces plus a portion of the automation rate pieces for the 5-digit ZIP Code on the merged pallet.

g. Pieces in low-volume carrier route bundles count as carrier route sorted pieces for purposes of determining the 5% limit under 1.4b through 1.4f even though the basic rate is paid. Pieces in low-volume 5-digit bundles count as 5-digit sorted pieces for purposes of determining the 5% limit under 1.4b through 1.4f even though the basic rate is paid. Since 5-digit scheme bundles cannot be placed on merged pallets, pieces in 5-digit scheme bundles do not count as 5-digit sorted pieces for purposes of determining the 5% limit.

1.5Pallet Preparation and Labeling

[6-10-04] Mailers must prepare pallets of bundles in the manner and sequence listed below and under M041. Mailers must prepare all merged 5-digit scheme, 5-digit scheme carrier routes, 5-digit scheme, and merged 5-digit pallets that are possible in the mailing based on the volume of mail to the destination using L001 and the 5% threshold, as applicable. Mailers must label pallets according to the Line 1 and Line 2 information listed below and under M031. If, due to the physical size of the mailpieces, the automation rate pieces are considered flat-size under C820 and the carrier route sorted pieces and Presorted rate pieces are considered irregular parcels under C050, “FLTS” must be shown as the processing category on the pallet label. If a mailing contains no automation rate pieces and the carrier route mailing and the Presorted rate mailing are irregular parcels, use “IRREG” for the processing category on the contents line of the pallet label.

a. Merged 5-Digit Scheme. Required. Permitted only when 5-digit bundles for at least one 5-digit ZIP Code in the scheme may be merged with carrier route bundles under the 5% threshold standard in 1.4. May contain carrier route bundles for any 5-digit ZIP Code in a single scheme listed in L001. May also contain automation rate 5-digit bundles and Presorted rate 5-digit bundles up to a maximum of 5% of the total number of pieces for each 5-digit ZIP Code in the scheme under 1.4. For 5-digit ZIP Codes not included in a scheme, begin preparing pallets under 1.5d (merged 5-digit pallet).

(1) Line 1: use L001, Column B.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “CR/5D SCHEME.”

b. 5-Digit Scheme Carrier Routes. Required. May contain only carrier route bundles for all carrier routes in an L001 scheme when a merged 5-digit scheme pallet could not be prepared under 1.5a.

(1) Line 1 use L001, Column B.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “CR-RTS SCHEME.”

c. 5-Digit Scheme. Not permitted for flats that meet the dimension, weight, and flexibility criteria of the AFSM 100 in C820.2.0, including copalletized or combined AFSM 100 flats and other flats, and not permitted for sacks or trays. Required for all other flats and irregular parcels. May contain only 5-digit bundles of automation rate and Presorted rate mail for the same 5-digit scheme under L001 that could not be placed on a merged 5-digit scheme pallet.

(1) Line 1: use L001, Column B.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “5D”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail; followed by “SCHEME” or “SCH.”

d. Merged 5-Digit. Required. Permitted only when 5-digit bundles may be merged with carrier route bundles under the 5% threshold standard in 1.4 for a 5-digit ZIP Code that is not part of an L001 scheme. May contain carrier route bundles, automation rate 5-digit bundles, and Presorted rate 5-digit bundles. The number of pieces in 5-digit bundles is limited to 5% of the total number of pieces placed on the pallet under 1.4.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M031 for military mail).

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or IRREG” as applicable; followed by “CR/5D.”

e. 5-Digit Carrier Routes. Required. May contain only carrier route rate bundles for the same 5-digit ZIP Code that is not part of a scheme for which a merged 5-digit pallet could not be prepared under 1.5d.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M031 for military mail).

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “CARRIER ROUTES” or “CR-RTS.”

f. 5-Digit. Required. May contain only automation rate 5-digit bundles and Presorted rate 5-digit bundles for the same 5-digit ZIP Code that could not be placed on a merged 5-digit pallet, or 5-digit scheme (L007) bundles (automation rate and cobundled automation and Presorted rate pieces only). Five-digit scheme bundles are assigned to 5-digit pallets according to the OEL “label to” 5-digit ZIP Code.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M031 for military mail).

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “5D”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail.

g. 5-Digit Metro. Optional. May contain carrier route, automation, and Presorted rate bundles for the 5-digit ZIP Codes listed in L006, Column A, and for the 3-digit ZIP Code areas listed in L006, Column B.

(1) Line 1: use L006, Column C.

(2) Line 2: “PER” or “NEWS”; followed by “FLTS” or “IRREG”; followed by “METRO” or “MET”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate and/or carrier route mail.

h. 3-Digit. Optional. Option not available for 3-digit ZIP Code prefixes marked “N” in L002. May contain carrier route rate, automation rate, and Presorted rate mail.

(1) Line 1: use L002, Column A.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “3D”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route mail.

i. SCF. Required. May contain carrier route rate, automation rate, and Presorted rate bundles.

(1) Line 1: use L002, Column C.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “SCF”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route mail.

j. ADC. Required. May contain carrier route rate, automation rate, and Presorted rate bundles.

(1) Line 1: use L004.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “ADC”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route mail.

2.0 Standard Mail

2.1Basic Standards

[6-10-04] Five-digit scheme bundles (under L007) must be prepared under M930. Five-digit scheme bundles may not be copalletized on merged pallets with carrier route bundles. Five-digit bundles from an automation rate mailing and 5-digit bundles from a Presorted rate mailing (including pieces cobundled under M950) may be placed on the same pallet as carrier route bundles under the following conditions:

a. A carrier route mailing must be part of the mailing job.

b. The pieces in the carrier route rate mailing, the automation rate mailing, and the Presorted rate mailing must be part of the same mailing job and all three mailings must be reported on the same postage statement.

c. Pieces in the automation rate mailing must meet the criteria for a flat under C050.3.2 and C820. Pieces in the Presorted rate mailing and the carrier route mailing must meet the criteria for a flat under C050.3.1.

d. Automation rate 5-digit bundles, Presorted rate 5-digit bundles, and cobundled 5-digit bundles may be copalletized with carrier route bundles only when the pieces in the 5-digit bundles do not exceed the 5% limit described in 2.3. Pallets of mail sorted in this manner are called “merged 5-digit” pallets. Pallets of mail sorted in this manner for which scheme sortation is also performed are called “merged 5-digit scheme” pallets. Since 5-digit scheme bundles cannot be placed on merged pallets, pieces in 5-digit scheme bundles do not count as 5-digit sorted pieces for purposes of determining the 5% limit.

e. If sortation under this section is performed, merged 5-digit scheme pallets must be prepared whenever there is enough volume of carrier route and 5-digit bundles under M041 and 2.3 to prepare such pallets.

f. The carrier route mailing must meet the eligibility criteria in E620, the automation rate mailing must meet the eligibility criteria in E640, and the Presorted rate mailing must meet the eligibility criteria in E620.

g. The rates are based on the level of bundle that the pieces are contained in under E620 and E640.

h. The bundles from each separate mailing must be sorted together on pallets (copalletized) using presort software that is PAVE-certified.

i. The pieces in each separate mailing must bear the applicable markings required under M610, M620, or M820 and under M012.

j. A complete, signed postage statement, using the correct USPS form or an approved facsimile, must accompany each mailing job prepared under these procedures.

k. In addition to the postage statement(s), documentation prepared by PAVE-certified software must be submitted with each copalletized mailing job that describes for each pallet sortation level and pallet the number of pieces qualifying for each applicable carrier route rate, each applicable automation rate, and each applicable Presorted rate under P012. A separate 5% threshold summary also must be provided under P012 for each “logical” merged 5-digit scheme or “logical” merged 5-digit pallet presort destination. This 5% threshold summary must show for each 5-digit ZIP Code on the logical merged 5-digit scheme or logical merged 5-digit pallet: the total number of pieces on the pallet for the 5-digit ZIP Code; the total number of pieces sorted in carrier route bundles for the 5-digit ZIP Code; the total number of pieces sorted in 5-digit bundles for the 5-digit ZIP Code, and; of the total number of pieces for the 5-digit ZIP Code, the percentage of pieces sorted in 5-digit bundles for that 5-digit ZIP Code. This additional 5% threshold summary must appear within the body of the documentation beneath the pallet rate listing for the last physical pallet for the logical pallet presort destination. Note: If there are two or more physical pallets for the same presort destination, for example, the same merged 5-digit pallet destination, these two or more physical pallets would be considered as one “logical pallet.” The separate pallet summary must be for the mail on all of the physical pallets (the “logical pallet”) for that presort destination.

l. Portions of the mailing job that cannot be palletized must be prepared in sacks under M610, M620, M820, M910, or M920.

2.2Bundle Preparation

Bundles placed on pallets must be prepared under the standards in M045.

2.35% Threshold Standard

[8-5-04] Five-digit bundles and carrier route bundles may be placed on the same merged 5-digit scheme and merged 5-digit pallet if all of the following conditions are met:

a. The number of pieces prepared in 5-digit bundles for any single 5-digit ZIP Code on a logical merged 5-digit or merged 5-digit scheme pallet does not exceed 5% of the total number of pieces for the 5-digit ZIP Code on the pallet(s) for the presort destination. That is, the total number of pieces for a 5-digit ZIP Code in 5-digit and carrier route bundles must not be greater than the number of pieces in carrier route bundles divided by 0.95.

b. The 5% threshold is calculated separately for each 5-digit ZIP Code. For example, if a scheme contains four different 5-digit ZIP Codes, a separate 5% threshold applies to each 5-digit ZIP Code for the scheme on a merged 5-digit scheme pallet. Since 5-digit scheme bundles may not be placed on merged pallets, pieces in 5-digit scheme bundles do not count as 5-digit sorted pieces for purposes of determining the 5% limit.

c. Except when bundles are prepared under the cobundling option in M950, all the mail in a logical 5-digit bundle must be able to be placed on the logical pallet under the 5% rule. A logical 5-digit bundle is all pieces for a mailing (rate level) prepared in a 5-digit bundle or bundles for the same 5-digit destination. For each 5-digit ZIP Code, it is possible to have a logical 5-digit bundle of automation rate mail and a logical 5-digit bundle of Presorted rate mail. If the total number of pieces in a logical 5-digit bundle exceeds the 5% limit, none of the pieces for that 5-digit bundle level may be placed on a merged 5-digit or merged 5-digit scheme pallet. For some ZIP Codes, the total number of pieces prepared in logical 5-digit bundles (both an automation rate 5-digit bundle and a Presorted rate 5-digit bundle) may exceed 5% of the total mail for that ZIP Code, but the number of pieces for an individual automation rate logical 5-digit bundle for that ZIP Code does not exceed the 5% limit nor does an individual Presorted rate logical 5-digit bundle for that ZIP Code exceed the 5% limit. In such instances, mailers may choose to place all of the pieces in a logical 5-digit bundle for a single rate category on the logical merged 5-digit or merged 5-digit scheme pallet so that the 5% threshold is not exceeded.

d. Except for bundles prepared under the cobundling option in M950, if the total number of pieces in both the logical 5-digit automation rate bundle and the logical 5-digit Presorted rate bundle each separately exceed 5% of the total number of pieces for the 5-digit ZIP Code, none of the pieces in 5-digit bundles may be merged with carrier route bundles on a merged 5-digit or merged 5-digit scheme pallet.

e. For mailing jobs prepared using the cobundling option in M950, if the total number of pieces prepared in a logical 5-digit bundle (containing automation rate and Presorted rate pieces) exceeds the 5% limit for a 5-digit ZIP Code in 2.3a, a mailer may, for each 5-digit ZIP Code, choose to place a portion of the pieces prepared in the logical 5-digit bundle on a merged 5-digit or 5-digit scheme pallet using one of the options below. Regardless of the option selected, a minimum of 10 pieces or 15 pieces as applicable must be prepared in 5-digit bundle(s) placed on the merged pallet and a minimum of 10 or 15 remaining pieces as applicable prepared in 5-digit bundle(s) not placed on the merged pallet, with the total number of pieces not exceeding the 5% limit. The options are:

(1) Place either all automation rate pieces or all Presorted rate pieces for the 5-digit ZIP Code on the merged pallet.

(2) Place a portion of either the automation rate pieces or the Presorted rate pieces for the 5-digit ZIP Code on the merged pallet.

(3) Place either all the automation rate pieces plus a portion of the Presorted rate pieces or all the Presorted rate pieces plus a portion of the automation rate pieces for the 5-digit ZIP Code on the merged pallet.

2.4Pallet Preparation and Labeling

[6-10-04] Mailers must prepare pallets of bundles in the manner and sequence listed below and under M041. Mailers must prepare all merged 5-digit scheme, 5-digit scheme carrier routes, 5-digit scheme, and merged 5-digit pallets that are possible in the mailing based on the volume of mail to the destination using L001 and the 5% threshold. Mailers must label pallets according to the Line 1 and Line 2 information listed below and under M031.

a. Merged 5-Digit Scheme. Required. Permitted only when 5-digit bundles for at least one 5-digit ZIP Code in the scheme may be merged with carrier route bundles under the 5% threshold standard in 2.3. May contain carrier route bundles for any 5-digit ZIP Code in a single scheme listed in L001. May also contain automation rate 5-digit bundles and Presorted rate 5-digit bundles up to a maximum of 5% of the total number of pieces for each 5-digit ZIP Code in the scheme under 2.3. For 5-digit ZIP Codes not included in a scheme, begin preparing pallets under 2.4c (merged 5-digit pallet).

(1) Line 1: use L001, Column B.

(2) Line 2: “STD FLTS CR/5D SCHEME.”

b. 5-Digit Scheme Carrier Routes. Required. May contain only carrier route bundles for all carrier routes in an L001 scheme when a merged 5-digit scheme pallet could not be prepared under 2.4a.

(1) Line 1: use L001, Column B.

(2) Line 2: “STD FLTS CR-RTS SCHEME.”

c. Merged 5-Digit. Required. Permitted only when 5-digit bundles may be merged with carrier route bundles under the 5% threshold standard in 2.3 for a 5-digit ZIP Code that is not part of an L001 scheme. May contain carrier route rate bundles, automation rate 5-digit bundles, and Presorted rate 5-digit bundles. The number of pieces in 5-digit bundles is limited to 5% of the total number of pieces placed on the pallet under 2.3.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M031 for military mail).

(2) Line 2: “STD FLTS CR/5D.”

d. 5-Digit Carrier Routes. Required. May contain only carrier route rate bundles for the same 5-digit ZIP Code that is not part of a scheme and for which a merged 5-digit pallet could not be prepared under 2.4c.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M031 for military mail).

(2) Line 2: “STD FLTS”; followed by “CARRIER ROUTES” or “CR-RTS.”

e. 5-Digit. Required. May contain only automation rate 5-digit bundles and Presorted rate 5-digit bundles for the same 5-digit ZIP Code that could not be placed on a merged 5-digit pallet, or 5-digit scheme (L007) bundles (automation rate and cobundled automation and Presorted rate pieces only). Five-digit scheme bundles are assigned to 5-digit pallets according to the OEL “label to” 5-digit ZIP Code.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M031 for military mail).

(2) Line 2: “STD FLTS 5D”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail.

f. 5-Digit Metro. Optional. May contain carrier route, automation, and Presorted rate bundles for the 5-digit ZIP Codes listed in L006, Column A, and for the 3-digit ZIP Code areas listed in L006, Column B.

(1) Line 1: use L006, Column C.

(2) Line 2: “STD FLTS” followed by “METRO” or “MET”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate and/or carrier route mail.

g. 3-Digit. Optional. Option not available for 3-digit ZIP Code prefixes marked “N” in L002. May contain carrier route rate, automation rate, and Presorted rate mail.

(1) Line 1: use L002, Column A.

(2) Line 2: “STD FLTS 3D”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route rate mail.

h. SCF. Required. May contain carrier route rate, automation rate, and Presorted rate bundles.

(1) Line 1: use L002, Column C.

(2) Line 2: “STD FLTS SCF”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route rate mail.

i. ASF. Required, except that an ASF sort may not be required if using bundle reallocation under M045.5.0. May contain carrier route rate, automation rate, and/or Presorted rate bundles. Sort ADC bundles to ASF pallets based on the “label to” ZIP Code for the ADC destination of the bundle in L004. At the mailer’s option, sort appropriate mixed ADC bundles to ASF pallets based on the “label to” ZIP Code for the ADC destination of the bundle in L802. All optional mixed ADC bundles on ASF pallets must contain only pieces destinating within the ASF as shown in E650 Exhibit 5.1. See E650.5.0 for additional requirements for DBMC rate eligibility.

(1) Line 1: use L602.

(2) Line 2: “STD FLTS ASF”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route rate mail.

j. BMC. Required. May contain carrier route rate, automation rate, and/or Presorted rate bundles. Sort ADC bundles to BMC pallets based on the “label to” ZIP Code for the ADC destination of the bundle in L004. At the mailer’s option, sort appropriate mixed ADC bundles to BMC pallets based on the “label to” ZIP Code for the ADC destination of the bundle in L802. All optional mixed ADC bundles on BMC pallets must contain only pieces destinating within the BMC as shown in E650 Exhibit 5.1. See E650.5.0 for additional requirements for DBMC rate eligibility.

(1) Line 1: Use L601.

(2) Line 2: “STD FLTS BMC”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route rate mail.

DMM Issue 58 Updated 12-9-04

ARCHIVED DMM
ARCHIVED DMM