 |
 |
M000 General Preparation Standards
M010 Mailpieces
M011 Basic Standards
Summary
M011 describes the presort process and presort levels. The section defines terms used for preparation of mail, the definition of a mailing, what can be included in a mailing, and explains Presort Accuracy Validation and Evaluation (PAVE).
1.0 Terms and Conditions
1.1Presort Process
Presort is the process by which a mailer prepares mail so that it is sorted to at least the finest extent required by the standards for the rate claimed. Generally, presort is performed sequentially, from the lowest (finest) level to the highest level, to those destinations specified by standard and is completed at each level before the next level is prepared. Under standards for bundle reallocation for Periodicals flats and irregular parcels and Standard Mail flats on pallets (see M041 and M045), mail will not necessarily be placed on the lowest (finest) level pallets (bundle reallocation is optional, but, if performed, must be done for the complete mailing job). Not all presort levels are applicable in all situations.
1.2Presort Levels
[9-2-04] Terms used for presort levels are defined as follows:
a. Firm: all pieces for delivery at the address shown on the top piece (for nonautomation Periodicals only).
b. Carrier route: all pieces for delivery to the same city route, rural route, highway contract route, post office box section, or general delivery unit.
c. 5-digit: the delivery address on all pieces includes the same 5-digit ZIP Code.
d. 5-digit scheme (trays) for automation letters: the ZIP Code in the delivery address on all pieces is one of the 5-digit ZIP Code areas processed by the USPS as a single scheme, as shown in the USPS City State Product.
e. 5-digit scheme (bundles and sacks) for AFSM 100-compatible flats: the ZIP Code in the delivery address on all pieces is one of the 5-digit ZIP Code areas processed by the USPS as a single scheme, as shown in L007.
f. 5-digit scheme carrier routes (pallets and sacks) for Periodicals flats and irregular parcels, Standard Mail flats, Bound Printed Matter flats (sacks only); and Bound Printed Matter irregular parcels (pallets only): the ZIP Code in the delivery address on all pieces in carrier route bundles is one of the 5-digit ZIP Codes processed by the USPS as a single scheme, as shown in L001.
g. 5-digit scheme (pallets) for Periodicals flats and irregular parcels and Bound Printed Matter flats and irregular parcels: the ZIP Code in the delivery address on all pieces is one of the 5-digit ZIP Codes processed by the USPS as a single scheme, as shown in L001.
h. 5-digit scheme (pallets and sacks) for Standard Mail parcels and Package Services parcels: the ZIP Code in the delivery address on all pieces begins with one of the 5-digit ZIP Code zones processed by the USPS as a single scheme, as shown in L606.
i. Merged 5-digit sacks: the carrier route bundles and/or automation rate 5-digit bundles and/or Presorted rate 5-digit bundles in a sack are all for a 5-digit ZIP Code that has an “A” or “C” indicator in the Carrier Route Indicators field in the City State Product that allows combining carrier route rate bundles with automation rate 5-digit bundles and Presorted rate 5-digit bundles in the same 5-digit container.
j. Merged 5-digit pallet: contains carrier route bundles and noncarrier route 5-digit bundles (automation rate 5-digit bundles and/or presorted rate 5-digit bundles).
k. Merged 5-digit scheme sack: the 5-digit ZIP Codes on pieces in carrier route bundles and/or automation rate 5-digit bundles and/or Presorted rate 5-digit bundles in a sack are all for 5-digit ZIP Codes that are part of a single scheme as shown in L001, and the automation rate 5-digit bundles and/or the Presorted rate 5-digit bundles also are for 5-digit ZIP Codes that have an “A” or “C” indicator in the Carrier Route Indicators field in the City State Product that allows combining carrier route bundles with automation rate 5-digit bundles and Presorted rate 5-digit bundles in the same 5-digit container.
l. Merged 5-digit scheme pallet: contains carrier route bundles and noncarrier route 5-digit bundles (automation rate 5-digit bundles and/or presorted rate 5-digit bundles) for those 5-digit ZIP Codes that are part of a single scheme as shown in L001.
m. 5-digit metro pallets for Periodicals, Standard Mail, and Bound Printed Matter flats and irregular parcels: the 5-digit ZIP Codes on pieces in carrier route, automation rate, and presorted rate bundles are all destined for the same mail processing facility listed in L006.
n. 3-digit: the ZIP Code in the delivery address on all pieces begins with the same three digits (see L002, Column A).
o. Unique 3-digit: the ZIP Code in the delivery address on all pieces begins with the same three digits, and that the 3-digit prefix is so identified in L002, Column A.
p. 3-digit scheme: the ZIP Code in the delivery address on all pieces begins with one of the 3-digit prefixes processed by the USPS as a single scheme, as shown in L003.
q. Origin/optional entry 3-digit(s): the ZIP Code in the delivery address on all pieces begins with one of the 3-digit prefixes processed at the sectional center facility (SCF) in whose service area the mail is verified/entered. Subject to standard, a separation is required for each such 3-digit area regardless of the volume of mail.
r. SCF: the separation includes pieces for two or more 3-digit areas served by the same sectional center facility (SCF) (see L005), except that, where required or permitted by standard, mail for a single 3-digit area may be prepared in an SCF separation when no mail for other 3-digit ZIP Code areas is available. For pallets, the SCF sort may include mail for a single 3-digit ZIP Code area.
s. Origin/optional entry SCF: the separation includes bundles for one or more 3-digit areas served by the same sectional center facility (SCF) (see L002, Column C, or L005) in whose service area the mail is verified/entered. Subject to standard, this separation is required regardless of the volume of mail.
t. ADC/AADC: all pieces are addressed for delivery in the service area of the same area distribution center (ADC) or automated area distribution center (AADC) (see L004 or L801).
u. ASF/BMC: all pieces are addressed for delivery in the service area of the same auxiliary service facility (ASF) or bulk mail center (BMC) (see L601, L602, or L605).
v. Mixed [BMC, ADC, AADC, etc.]: the pieces are for delivery in the service area of more than one BMC, ADC, AADC, etc.
w. Residual pieces/bundles/sacks contain material remaining after completion of a presort sequence. Residual mail lacks the volume set by standard to require or allow bundle preparation to a particular destination, and usually does not qualify for a presort rate. Residual mail is also referred to as nonqualifying or working mail.
1.3Preparation Instructions
[9-2-04] For purposes of preparing mail:
a. Pieces refers to individually addressed mailpieces. This definition also applies when pieces is used in eligibility standards. Quantities indicated for optional or required sortations always refer to pieces unless specifically excepted.
b. A full letter tray is one in which faced, upright pieces fill the length of the tray between 75% and 100% full.
c. A less-than-full letter tray is one that contains mail for the same destination regardless of quantity or whether a full tray was previously prepared for that destination. Less-than-full trays may be prepared only if permitted by the standards for the rate claimed.
d. An overflow letter tray is a less-than-full tray that contains all pieces remaining after preparation of full trays for the same destination. Overflow trays may be prepared only if permitted by the standards for the rate claimed.
e. A full flat tray is one that is physically full. Although a specific minimum volume is required (at least a single stack of mail lying flat on the bottom of the tray and filling the tray to the bottom of the handholds) before a tray may or must be prepared to the corresponding presort destination, trays must be filled with additional available pieces (up to the reasonable capacity of the tray) when standards require preparation of full trays.
f. A less-than-full flat tray is one that contains First-Class Mail for the same destination regardless of quantity or whether a full tray was previously prepared for that destination. Less-than-full flat trays may be prepared only if permitted by the standards for the rate claimed.
g. An overflow flat tray is a less-than-full First-Class Mail tray that contains all pieces remaining after preparation of one or more full trays for the same destination. Overflow flat trays may be prepared only if permitted by the standards for the rate claimed.
h. A full sack is defined in the standards for the class and rate claimed.
i. A 5-digit scheme sort for automation letters yields 5-digit scheme trays for those 5-digit ZIP Codes identified in the USPS City State Product and 5-digit trays for other areas. Mail prepared using 5-digit scheme sort must be entered no later than 90 days after the release date of the City State Product used to obtain the scheme information (see A950). The 5-digit ZIP Codes in each scheme are treated as a single presort destination subject to a single minimum volume, with no further separation by 5-digit ZIP Code required. Trays prepared for a 5-digit scheme destination that contain pieces for only one of the schemed 5-digit ZIP Codes are still considered 5-digit scheme sorted and are labeled accordingly. The 5-digit scheme sort is always optional, including when 5-digit sortation is required for rate eligibility; need not be used for all 5-digit ZIP Codes that are part of a scheme; and is available only for automation rate letter-size First-Class Mail, Periodicals, and Standard Mail and may not be used for mail at other rate.
j. A 5-digit scheme sort for AFSM 100-compatible flats yields 5-digit scheme bundles for those 5-digit ZIP Codes identified in L007. Presorting must be performed using L007. Pieces prepared in scheme bundles must meet the AFSM 100 compatibility criteria in C820.2.0. The 5-digit ZIP Codes in each scheme are treated as a single presort destination subject to a single minimum volume, with no further separation by 5-digit ZIP Code required. Bundles prepared for a 5-digit scheme destination that contain pieces for only one of the schemed 5-digit ZIP Codes are still considered 5-digit scheme sorted and are labeled accordingly. The 5-digit scheme sort is optional, except under M930 and M940. Mailpieces must be labeled using an optional endorsement line (OEL) under M013. Bundles are placed in appropriate containers using the OEL “label to” 5-digit ZIP Code. Periodicals firm bundles must not be part of a 5-digit scheme bundles.
k. A 5-digit scheme carrier routes sort for carrier route rate Periodicals flats and irregular parcels (nonletters), Enhanced Carrier Route rate Standard Mail flats, and Carrier Route Bound Printed Matter flats, prepared in sacks or as bundles on pallets yields a 5-digit scheme carrier routes sack or pallet for those 5-digit ZIP Codes listed in L001 and 5-digit carrier routes sacks or pallets for other areas. The 5-digit ZIP Codes in each scheme are treated as a single presort destination subject to a single minimum sack or pallet volume, with no further separation by 5-digit ZIP Code required. Sacks or pallets prepared for a 5-digit scheme carrier routes destination that contain carrier route bundles for only one of the schemed 5-digit areas are still considered to be sorted to 5-digit scheme carrier routes and are labeled accordingly. The 5-digit scheme carrier routes sort is required for carrier route bundles of flat-size and irregular parcel Periodicals, for Enhanced Carrier Route Standard Mail flats, and for Carrier Route Bound Printed Matter flats. Preparation of 5-digit scheme carrier routes sacks or pallets must be done for all 5-digit scheme destinations.
l. A 5-digit scheme sort for Periodicals flats and irregular parcels (nonletters), Standard Mail flats, and Presorted Bound Printed Matter flats prepared as bundles on pallets yields 5-digit scheme pallets containing automation rate and Presorted rate 5-digit bundles for those 5-digit ZIP Codes listed in L001 and yields 5-digit pallets containing automation rate and Presorted rate 5-digit bundles for other areas (automation rate bundles are not applicable to Bound Printed Matter). The 5-digit ZIP Codes in each scheme are treated as a single presort destination subject to a single minimum pallet volume, with no further separation by 5-digit ZIP Code required. Pallets prepared for a 5-digit scheme destination that contain 5-digit bundles for only one of the schemed 5-digit areas are still considered to be sorted to the 5-digit scheme and are labeled accordingly. The 5-digit scheme sort is required for flat-size and irregular parcel-size Periodicals, for Standard Mail flats, and for Presorted Bound Printed Matter flats. The 5-digit scheme sort may not be used for other mail prepared on pallets, except for 5-digit bundles of Standard Mail irregular parcels that are part of a mailing job that is prepared in part as palletized flats at automation rates. Preparation of 5-digit scheme pallets must be done for all 5-digit scheme destinations.
m. A 5-digit scheme sort for Standard Mail parcels and Package Services parcels yields 5-digit scheme sacks or pallets for those 5-digit ZIP Codes listed in L606 and 5-digit sacks or pallets for other ZIP Codes. The 5-digit ZIP Codes in each scheme are treated as a single presort destination subject to a single minimum volume (if required), with no further separation by 5-digit ZIP Code required. Sacks or pallets prepared for a 5-digit scheme destination that contain pieces for only one of the schemed 5-digit ZIP Codes are still considered 5-digit scheme sorted and are labeled accordingly. The 5-digit scheme sort is always optional, including when 5-digit sortation is required for rate eligibility. The 5-digit scheme sort need not be used for all possible 5-digit scheme sorts.
n. A merged 5-digit sort for Periodicals flats and irregular parcels and Standard Mail flats prepared in sacks yields merged 5-digit sacks that contain carrier route bundles and/or automation rate 5-digit bundles, and/or Presorted rate 5-digit bundles that are all for a 5-digit ZIP Code that has an “A” or “C” indicator in the Carrier Route Indicators field in the City State Product that allows combining carrier route bundles, automation rate 5-digit bundles, and Presorted rate 5-digit bundles in the same 5-digit sack or pallet. The merged 5-digit sort is optional for Periodicals flats and irregular parcels and Standard Mail flats prepared in sacks. Sacks prepared for a merged 5-digit destination that contain only a single rate level of bundle(s) (only carrier route bundle(s) or only automation rate 5-digit bundle(s) or only Presorted rate 5-digit bundle(s)) or that contain only two rate levels of bundle(s) are still considered to be merged 5-digit sorted and are labeled accordingly. If preparation of merged 5-digit sacks is performed, it must be done for all 5-digit ZIP Code destinations with an “A” or “C” indicator in the Carrier Route Indicators field in the City State Product that allows combining carrier route bundles, automation rate 5-digit bundles, and Presorted rate 5-digit bundles in the same 5-digit container.
o. A merged 5-digit sort for Periodicals, Standard Mail, and Bound Printed Matter flats and irregular parcels prepared as bundles on pallets yields merged 5-digit pallets that contain carrier route bundles and noncarrier route 5-digit bundles (automation rate 5-digit bundles and/or presorted rate 5-digit bundles). The merged 5-digit sort is optional for Periodicals flats and irregular parcels and Standard Mail flats prepared in sacks under M920. Sacks or pallets prepared for a merged 5-digit destination that contain only a single rate level of bundle(s) (only carrier route bundle(s) or only automation rate 5-digit bundle(s) or only presorted rate 5-digit bundle(s)) or only two rate levels of bundle(s) are still considered to be merged 5-digit sorted and must be labeled accordingly.
p. A merged 5-digit scheme sort for Periodicals flats and irregular parcels and Standard Mail flats prepared in sacks under M920 yields merged 5-digit scheme sacks that contain carrier route bundles and noncarrier route 5-digit bundles (automation rate 5-digit bundles and/or presorted rate 5-digit bundles) for those 5-digit ZIP Codes that are part of a single scheme as shown in L001. Sacks prepared for a merged 5-digit scheme destination that contain only a single rate level of bundle(s) (only carrier route bundle(s) or only automation rate 5-digit bundle(s) or only presorted rate 5-digit bundle(s)), or only two rate levels of bundle(s), or bundles for only one of the schemed 5-digit ZIP Codes are still considered to be merged 5-digit scheme sorted and must be labeled accordingly. If preparation of merged 5-digit scheme sacks is performed, it must be done for all 5-digit scheme destinations in L001.
q. A merged 5-digit scheme sort for Periodicals flats and irregular parcels, Standard Mail flats and irregular parcels, and Bound Printer Matter flats and irregular parcels prepared as bundles on pallets under M045, M920, M930, or M940, as appropriate, yields merged 5-digit scheme pallets that contain carrier route bundles and noncarrier route 5-digit bundles (automation rate and/or presorted rate 5-digit bundles) for those 5-digit ZIP Codes that are part of a single scheme as shown in L001. Pallets prepared for a merged 5-digit scheme destination that contain only a single rate level of bundle(s) (only carrier route bundle(s) or only automation rate 5-digit bundle(s) or only presorted rate 5-digit bundle(s)), or only two rate levels of bundle(s), or bundles for only one of the schemed 5-digit ZIP Codes are still considered to be merged 5-digit scheme sorted and must be labeled accordingly. If preparation of merged 5-digit scheme pallets is performed, it must be done for all 5-digit scheme destinations in L001.
r. A 5-digit metro sort for Periodicals, Standard Mail, and Bound Printed Matter flats and irregular parcels prepared as bundles on pallets yields 5-digit metro pallets that contain carrier route and/or noncarrier route 5-digit and 3-digit bundles (automation rate and/or presorted bundles) for the 5-digit ZIP Codes listed in L006. The ZIP Codes in L006 are treated as a single presort destination, with no further separation by 5-digit ZIP Code required. The 5-digit metro sort is optional and need not be done for all possible destinations in L006.
s. A 3-digit scheme sort yields 3-digit scheme trays for those 3-digit ZIP Code prefixes listed in L003 and 3-digit trays for other areas. The 3-digit ZIP Code prefixes in each scheme are treated as a single presort destination subject to a single minimum tray volume, with no further separation by 3-digit prefix required. Trays prepared for a 3-digit scheme destination that contain pieces for only one of the schemed 3-digit areas are still considered 3-digit scheme sorted and are labeled accordingly. The 3-digit scheme sort is required for automation rate letter-size First-Class Mail, Periodicals, and Standard Mail and is not permitted to be used for mail entered at another rate.
t. An origin 3-digit (or origin 3-digit scheme) tray/sack contains all mail (regardless of quantity) for a 3-digit ZIP Code (or 3-digit scheme) area processed by the SCF in whose service area the mail is verified. If more than one 3-digit (or 3-digit scheme) area is served, as indicated in L005, a separate tray/sack must be prepared for each.
u. An origin/optional entry SCF sack contains all 5-digit and 3-digit bundles (regardless of quantity) for the SCF in whose service area the mail is verified. At the mailer's option, such a sack may be prepared for the SCF area of each entry post office. This presort level applies only to nonletter-size Periodicals prepared in sacks.
v. The required at [quantity] instruction (e.g., “required at 10 pieces”) means that the particular unit must be prepared for the corresponding presort level whenever the specified quantity of mail is reached or exceeded. Bundles and containers may contain more than the specified required at quantity up to the applicable maximum physical size. Subject to applicable rate eligibility standards, smaller quantities may be prepared only if permitted. Where specified by standard, required preparation applies only if the mailer chooses to qualify for the corresponding rate.
w. The optional at [quantity] instruction means that the particular unit may be prepared for the corresponding presort level whenever the specified quantity of mail is reached or exceeded. Bundles or containers may contain more than the specified optional at quantity up to the applicable maximum physical size. Smaller quantities may be prepared only if permitted by applicable rate eligibility standards. Standards for quantities with which preparation is optional are often followed by standards for larger quantities with which preparation is required.
x. Entry [facility] (or origin [facility]) refers to the USPS mail processing facility (e.g., “entry BMC”) that serves the post office at which the mail is entered by the mailer. If the post office where the mail is entered is not the one serving the mailer’s location (e.g., for plant-verified drop shipment), the post office of entry determines the entry facility. Entry SCF includes both single-3-digit and multi-3-digit SCFs. Entry BMC includes subordinate ASFs unless otherwise specified.
y. The group pieces instruction means the pieces are to be sorted together as if to be bundled but not actually secured into a bundle. Bundle labels and other bundle identification methods may be used for unsecured groups of pieces as permitted by standard.
z. A bundle is a group of addressed pieces secured together as a unit. The presort process considers the total number of pieces available for the particular presort destination and assembles them into groups meeting applicable volume and size standards. When the standards for the rate claimed require securing the pieces in each group together, the result is a bundle. The term bundle does not apply to unsecured groups of pieces (e.g., pieces prepared in trays and identified by separator cards or tic marks). Bundle preparation is described in M020.
aa. A tic mark is defined as a solid black rectangle that must be printed on both the front side (extending over the top) and back side (flap side) of the envelope. Tic marks may be used in lieu of separator cards for First-Class Mail and Standard Mail automation mailings and separator cards or rubber bands in Periodicals and Standard Mail nonautomation carrier route mailings prepared in full 5-digit carrier routes trays. Tic marks must be printed on the top edge of the first mailpiece in each carrier route grouping during the mailpiece production process and must meet the following specifications:
(1) Color: black.
(2) Reflectance and Contrast Ratio: The tic mark must meet the reflectance and contrast ratio specifications in C840.5.0.
(3) Location: The tic mark must extend along the top edge of the envelope, to the left of center line of the envelope. Its location must be referenced to the center line. The right edge of the tic mark must be 0.5 inch (+ 0.125 inch) from the center line of the envelope.
(4) Size: The width of the tic mark must be 0.5 inch
(+ 0.125 inch). The tic mark must extend over the top of the
envelope, down each side a distance of 0.25 inch (+ 0.125 inch).
When a second tic mark is used to indicate a tray break at the end of
the tray, all specifications are the same as for one tick mark, except
for the location on the envelope. When a second tic mark is used on
the last piece in a tray to indicate a tray break, the right edge of
the second tic mark must be 0.5 inch
(+ 0.125 inch) from the left edge of the first tic mark.
ab. An overflow sack for Parcel Select (Parcel Post) DSCF rate mail is a 5-digit scheme or 5-digit sack prepared with fewer than seven pieces after all other sacks for that same 5-digit scheme or 5-digit ZIP Code area are prepared with seven or more pieces per sack as required by M710. If all of the mail is sacked under M710, only one overflow sack is permitted for each 5-digit scheme or 5-digit ZIP Code. If a mailing is prepared on pallets, remaining pieces of Parcel Post mail may be prepared in one or more 5-digit scheme or 5-digit overflow sacks only after one or more 5-digit scheme or 5-digit pallets are prepared to meet the minimum pallet requirement specified in M045. Pieces in overflow sacks qualify for the Parcel Select (Parcel Post) DSCF rates.
ac. An overflow pallet in a Parcel Select (Parcel Post) DSCF rate mailing is a 5-digit scheme or 5-digit pallet containing pieces that remain after one or more 5-digit scheme or 5-digit pallets have been prepared to meet the minimum pallet requirement specified in M045. Only one overflow pallet per 5-digit scheme or 5-digit ZIP Code area is permitted for Parcel Select (Parcel Post) DSCF rate mail palletized under M045. Pieces on overflow pallets qualify for the DBMC rates.
ad. A “logical” presort destination represents the total number of pieces that are eligible for a specific presort level based on the required sortation, but which might not be contained in a single bundle or in a single container (i.e., sack, pallet) due to applicable preparation requirements or the size of the individual pieces. For example, there may be 42 mailpieces for ZIP Code 43112 forming a Standard Mail “logical” 5-digit bundle, and they are prepared in three physical 5-digit bundles because of the applicable weight and height restrictions on bundles. For pallets, 2,800 pounds of mail may be destined to an SCF destination, and these would form the “logical” SCF pallet, but the mail is placed on two physical SCF pallets each weighing 1,400 pounds because of the 2,200 pound maximum pallet weight requirement.
ae. Cobundling is an alternate preparation method available under M950 for First-Class Mail, Periodicals, and Standard Mail that allows the combining of flat-size automation rate and Presorted rate pieces within the same bundle under the single minimum bundle size requirement. Cobundling is available also for combining within the same bundle flat-size Bound Printed Matter Presorted rate pieces qualifying for and claiming the barcoded discount and Presorted rate pieces not qualifying for the barcoded discount. Regardless of the class of mail, pieces may not be combined in more than one physical bundle for each logical presort destination unless presented using an approved manifest mailing system under P910.
1.4Mailings
Mailings are defined as:
a. General. A mailing is a group of pieces within the same class of mail and, except for certain parcel rates, the same processing category that may be sorted together and/or presented under a single minimum volume mailing requirement under the applicable standards. Generally, types of mail that follow different flows through the postal processing system (e.g., automation, nonautomation carrier route, and other nonautomation) and mail for each separate class and subclass must be prepared as a separate mailing. Other specific standards may define whether separate mailings may be combined, palletized, reported, or deposited together.
b. First-Class Mail. Cards and letters must be prepared as separate mailings except that they may be sorted together if each meets separate minimum volume requirements. The types of First-Class Mail listed below must not be part of the same mailing despite being in the same processing category (see M910 and M950 for advanced preparation options for flat-size mail):
(1) Automation rate and any other type of mail.
(2) Presorted rate and any other type of mail.
(3) Single-piece rate and any other type of mail.
(4) Machinable and nonmachinable pieces.
c. Periodicals. Mail qualifying for the In-County rates may be part of a mailing that includes pieces eligible for the Outside County rates. Mail at carrier route rates, nonautomation Presorted rates, and automation rates must each be sorted as separate mailings. However, each of these mailings may be reported on the same postage statement if the pieces are for the same publication and edition. See M041, M045, M210, and M220 for copalletized, combined, or mixed-rate mailings. See M900 for advanced preparation options for nonletter-size mail.
d. Standard Mail. Except as provided in E620.1.2, the types of Standard Mail listed below may not be part of the same mailing. See M041, M045, M610, M620,and M900 for copalletized, combined, or mixed-rate mailings.
(1) Automation Enhanced Carrier Route and any other type of mail.
(2) Automation rate and any other type of mail.
(3) Enhanced Carrier Route and any other type of mail.
(4) Enhanced Carrier Route letter rate pieces and Enhanced Carrier Route nonletter rate pieces.
(5) Presorted rate mail and any other type of mail.
(6) Machinable and nonmachinable pieces.
(7) Except as provided by standard, Regular mail may not be in the same mailing as Nonprofit mail, and Enhanced Carrier Route mail may not be in the same mailing as Nonprofit Enhanced Carrier Route mail.
(8) Customized MarketMail and any other type of mail.
e. Package Services. Except for single-piece rate pieces not otherwise subject to a minimum mailing requirement that are presented under an approved manifest mailing system under P910, the types of Package Services listed below may not be part of the same mailing even if in the same processing category. See P910 and M950 for the advanced preparation options available for flat-size Bound Printed Matter.
(1) Parcel Post mail and any other type of mail.
(2) Bound Printed Matter and any other type of mail.
(3) Media Mail and any other type of mail.
(4) Library Mail and any other type of mail.
2.0 Presort Accuracy Validation and Evaluation (PAVE)
2.1Basic Information
The Presort Accuracy Validation and Evaluation (PAVE) program is a process to evaluate presort software and determine its accuracy in sorting address files under DMM standards. PAVE is available only to software and hardware manufacturers (i.e., companies that develop presort software or manufacture presorting equipment). PAVE certification does not guarantee acceptance of customer mail prepared with PAVE-validated hardware/software.
2.2Process
PAVE evaluates the accuracy of presort products by providing test address files to vendors. Vendors process the test file(s) through their presort software or hardware and return the resulting postage statement facsimile(s) and other presort documentation to the USPS National Customer Support Center (NCSC) for evaluation of the answers. Each test file is evaluated for its accuracy of presort, compliance with current DMM standards, accuracy of sack/tray/pallet tag labels, and general acceptability of computer-generated facsimiles of postage statements and other presort documentation. If the answers are accurate, the vendor’s presort product is validated for a 12-month period or until the end of the current annual period.
2.3Participation
For information on participation in PAVE, presort product developers may request the PAVE Program Technical Guide from the NCSC by calling 1-800-238-3150. Participants may use the PAVE form included in that guide to order PAVE test files.
DMM Issue 58 Updated 12-9-04