Overview
1.0 Presenting a Mailing
2.0 Destination Entry
3.0 Destination Network Distribution Center (DNDC) Entry
4.0 Destination Sectional Center Facility (DSCF) Entry
5.0 Destination Delivery Unit (DDU) Entry
6.0 Destination Flat Sequencing System (DFSS) Facility Entry
All USPS Marketing Mail must be presented at the Post Office where the permit or license is held and the presort mailing fee is paid, at the locations and times specified by the postmaster, except as follows:
- Plant-verified drop shipment (PVDS) mailings must be presented under 705.17.0.
- Plant-loaded mailings must be presented as specified by the plant load agreement.
- Metered mailings may be deposited at other than the licensing Post Office only as permitted under 705.19.0.
- Nonprofit USPS Marketing Mail must be presented only at Post Offices where the organization producing the mailing has an approved nonprofit authorization (703.1.0).
Pieces at different prices may be combined in the same mailing as provided in 245.1.0. Separate mailings may be reported on the same postage statement if the pieces in the mailings are in the same processing category, are part of the same mailing job, and are presented for verification at the same time.
Except for Customized MarketMail pieces defined in 705.1.0, all USPS Marketing Mail pieces meeting the basic standards in 243.2.0 through 243.4.0 may qualify for destination entry prices, if deposited at the correct destination postal facility, subject to the standards below and in 3.0, 4.0, and 5.0. Only one destination entry price may be claimed for each piece. A pallet may contain mail claimed at different destination entry prices.
A destination entry price USPS Marketing Mail mailing is subject to these minimum volume requirements:
- Each mailing must contain at least 200 addressed pieces or 50 pounds of addressed pieces.
- Except as provided in 2.2d, each group of pieces prepared for deposit at different destination entry facilities must be presented as a separate mailing meeting separate minimum volume requirements and be accompanied by a postage statement.
- If a facility is authorized to accept mail at more than one entry level, all pieces claimed at the different entry prices may be in one mailing and may be recorded on the same postage statement.
- When pieces from different price USPS Marketing Mail mailings are presented together under plant-verified drop shipment (PVDS) procedures in 705.17.0, a mailer may use the total piece count from one presort file (i.e., mailing job) reported on one Form 3602 and accompanied by Form 3602-C (or a postage statement register) to meet the minimum volume requirement for each mailing. Under this alternative, a mailer may enter fewer than 200 pieces or 50 pounds at a single destination entry facility if there is at least 200 pieces or 50 pounds of Presorted price mail, 200 pieces or 50 pounds of automation price mail, and/or 200 pieces or 50 pounds of Enhanced Carrier Route mail for all entry points combined for the single presort file.
Postage payment for destination entry mailings is subject to the same standards that apply generally to USPS Marketing Mail. No documentation for destination entry discounts is required.
Plant load mailings are not eligible for destination entry discounts.
Destination entry mail must be presented and verified under a PVDS system (705.17.0), presented for acceptance at a BMEU located at a destination postal facility; or presented for acceptance at an origin DMU or BMEU, and then prepared under Priority Mail Express Open and Distribute or Priority Mail Open and Distribute standards (705.18.0). Only PVDS mailings may be deposited at a destination facility not co-located with a postal facility having a business mail entry unit. Destination entry mailings must meet the following requirements:
- The mailer must present each mailing separately for verification. For PVDS, each mailing for deposit at one destination postal facility must be separated from mailings for deposit at other facilities to allow reconciliation with each required accompanying Form 8125, 8125-C, or 8125-CD.
- Mail must be separated from freight transported on the same vehicle.
- If Periodicals mail is on the same vehicle as USPS Marketing Mail, the mailer should load the Periodicals mail toward the tail of the vehicle so that Periodicals mail can be offloaded first.
When mailings are verified and paid for at a postal facility different from the one at which they are deposited as mail, the mailer must ensure that they are accompanied by a completed Form 8125 (or 8125-C or 8125-CD), except for mailings prepared under Priority Mail Express Open and Distribute or Priority Mail Open and Distribute standards in 705.18.0.
For a mailing verified at a NDC, the Post Office where the mailer‘s account or license is held must be within the service area of that NDC. The Post Office must authorize the NDC to act as its agent by sending Form 4410 to the NDC.
The mailer must transport the PVDS mailing from the place where it was verified to the appropriate destination postal facility.
Except as permitted for a local mailer under 2.6.13, destination entry mailings are subject to these volume standards:
- Except for product samples, the pieces for which a destination price is claimed must represent more than 50% of the mail (by weight or pieces, whichever is greater) presented by the same mailer within any 24-hour period. Product Sample mailings must be 100% destination entry. For this standard, mailer is the party presenting the mail to the USPS.
- The same mailer (or agent) may not in a 24-hour period present for verification and acceptance more than four destination price mailings at the same destination postal facility, unless the mailer or agent has received a waiver when scheduling the deposit of the mailings. There is no maximum for PVDS mailings.
Each mailing claimed at a destination price must be deposited at the time and location specified by the USPS.
Drop shipments are freight until deposited and accepted as mail at the destination facility.
Appointments must be made for destination entry price mail as follows:
- Except for a local mailer under 2.6.13 and mailings of perishable commodities, appointments for deposit of destination entry price mail at NDCs, ASFs, and SCFs must be scheduled through the appropriate appointment control center at least one business day in advance. Same-day appointments may be granted by a control center only through a telephone request. All appointments for NDC loads must be scheduled by the appropriate NDC control center. Appointments for SCFs and ASFs must be scheduled through the appropriate district control center. Appointments may be made up to 30 calendar days before a desired appointment date. The mailer must adhere to the scheduled mail deposit time and location. The mailer must cancel any appointment by notifying the appropriate control center at least 24 hours in advance of a scheduled appointment.
- Electronic appointments may be made by a mailer or agent using a USPS-issued computer logon ID. Electronic appointments or cancellations must be made at least 12 hours before the desired time and date. All information required by the USPS appointment system regarding a mailing must be provided.
- For deposit of DDU mailings, an appointment must be made by contacting the DDU at least 24 hours in advance. If the appointment must be canceled, the mailer must notify the DDU at least one business day in advance of a scheduled appointment. Recurring appointments are allowed if shipment frequency is once a week or more often.
- When Periodicals are transported together with USPS Marketing Mail or Package Services as a mixed load (207.29.0), an appointment must be obtained for deposit at a destination entry facility.
Mailers must schedule appointments for deposit of destination entry price mail under 2.6.3 and the conditions below. When making an appointment, or as soon as available, the mailer must provide the control center or DDU with the following information:
- Mailer’s name and address and, when applicable, the name and telephone number of the mailer’s agent or local contact.
- Description of what is being mailed, product name, number of mailings, volume of mail, how prepared and whether containerized (e.g., pallets). For DDU entries, the mailer also must provide the 5-digit ZIP Code(s) of the mail being deposited.
- Where the mailing was verified.
- Postage payment method.
- Requested date and destination facility for mailing.
- Vehicle identification number, size, and type.
The mailer must follow the scheduled deposit time or cancel the appointment by notifying the designated control center. Destination facilities may refuse acceptance or deposit of unscheduled mailings or shipments that arrive more than 2 hours after the scheduled appointment at ASFs, NDCs, or SCFs or more than 20 minutes at delivery units.
A mailer may be directed to transport destination entry price mailings to a facility other than the designated DDU, SCF, or NDC due to facility restrictions, building expansions, peak season mail volumes, or emergency constraints.
A mailer may ask to transport destination SCF price mail to a facility other than the designated SCF. In very limited circumstances, this exception may be approved only by the manager, Network Integration Support (see 608.8.0 for address). To qualify for the SCF price in this situation, mail deposited at a facility other than the SCF must destinate for processing within that facility and must not require backhauling to the SCF.
Recurring refers to a drop shipment that is delivered to a destination office with a frequency of at least once a week on the same time and day(s). Mailings must be of a comparable product in terms of mail class, size, volume, and containerization (pallets, pallet boxes, etc.). A request to establish recurring appointments must be written on company letterhead to the postal facility manager/postmaster. The drop shipment appointment control office/postmaster will respond to all requests within 10 days. Recurring appointments may be made for a period not to exceed 6 months. Thereafter, a new application must be submitted to ensure that up-to-date mailer information is on file. Written request for an additional 6 months may be made within 60 days prior to the expiration of a current arrangement. Failure to adhere to scheduled appointments or other abuse of the procedures will result in revocation of recurring appointment privileges. Requests for recurring appointments must include the following:
- Name, address, and telephone number of the mailer.
- Transportation agent‘s name (contact person) and telephone number(s).
- Mail volume and preparation (trays/sacks/parcels).
- Containerization.
- Size and type of trailer(s) transporting mail.
- Frequency/schedule.
Unloading of destination entry mailings is subject to these conditions:
- Properly prepared containerized loads (e.g., pallets) are unloaded by the USPS at NDCs, ASFs, and SCFs. The USPS does not unload or permit the mailer (or mailer’s agent) to unload palletized loads that are unstable or severely leaning or that have otherwise not maintained their integrity in transit.
- At NDCs, ASFs, and SCFs, the driver must unload bedloaded shipments within 8 hours of arrival. Combination containerized and bedloaded mailings are classified as bedloaded shipments for unload times. The USPS may assist in unloading.
- At destination delivery units (DDUs), drivers must unload all mail within 1 hour of arrival. Unloading procedures are as follows:
- If pallets or pallet boxes are stacked, drivers must unload, unstrap, and unstack them.
- When drivers unload containerized mail, delivery unit employees may require drivers to place the containers together by 5-digit ZIP Codes or 5-digit schemes.
- When mail is not containerized or on pallets, drivers must place the mail into containers as delivery unit employees specify. Delivery unit employees may require drivers to place mail into containers to separate mail by 5-digit ZIP Codes or 5-digit schemes.
- At DDUs that cannot handle pallets, drivers must unload any mail from pallets and place it into containers as delivery unit employees specify.
- When driver unloading is required, the driver or assistant must stay with and continue to unload the vehicle once at the dock.
- The driver must remove the vehicle from USPS property after unloading. The driver and assistant are not permitted in USPS facilities except for the dock and designated driver rest area.
Drop and pick service is not available for destination entry USPS Marketing Mail.
The USPS is not responsible for demurrage or detention charges incurred by a mailer who presents destination entry price mailings.
Mailers who believe they are denied equitable treatment may appeal to the manager, customer service (district), responsible for the destination postal facility.
The restrictions in 2.5.5, and 2.6.4, do not apply when a mailer deposits mailings for verification and acceptance at the local Post Office serving the facility where the mail was prepared, if the mailings are not verified under a plant load authorization or plant-verified drop shipment postage payment authorization. Under this exception, the mailer may claim the destination entry prices for mailings or portions of mailings deposited at the local Post Office that meet the standards in 3.0 through 6.0.
For this standard, destination network distribution center (DNDC) includes network distribution centers (NDCs) and auxiliary service facilities (ASFs) with terms and exceptions as shown and described in labeling lists L601 and L602.
Pieces in a mailing that meets the standards in 2.0 and 3.0 are eligible for DNDC prices when they are deposited at an NDC or ASF and meet all of the following conditions:
- The pieces are addressed for delivery to one of the 3-digit ZIP Codes served by the NDC or ASF where deposited (see labeling lists L601 and L602).
- The pieces are properly placed in a tray, sack, or pallet that is labeled to the NDC or ASF where deposited, or labeled to a postal facility within the service area of that NDC or ASF. Product Samples must be palletized under 245.12.5 or 705.8.10.3.
- Mail addressed to ZIP Codes served by an ASF must be entered at the appropriate ASF per L602, and not entered at an NDC.
- If bundles of flats are reallocated from an ASF pallet to an NDC pallet under 705.8.14, mail for the ASF ZIP Codes that is on the NDC pallet is not eligible for DNDC prices.
- Except for machinable parcels addressed to ZIP Codes served by the Buffalo NY ASF, mail addressed to ZIP Codes served by an ASF must be entered at the appropriate ASF per L602, and not entered at an NDC.
All pieces in an ADC sack or tray are eligible for the DNDC discount if the ADC facility ZIP Code (as shown on Line 1 of the corresponding container label) is within the service area of the NDC or ASF at which the tray is deposited, as described in labeling lists L601 and L602. All pieces in a palletized ADC bundle are eligible for DNDC prices if the ADC facility destination (determined by the “Label To” ZIP Code in Column B of labeling list L004) is within the service area of the NDC or ASF at which deposited according to L601 and L602.
Mailpieces in a mixed ADC or a mixed AADC tray can qualify for DNDC prices when entered at a NDC/ASF or SCF facility responsible for the processing of those trays (see 705.8.10.3e.), if the following standards are met:
- All pieces in the bundle or tray must destinate within the ASF or NDC service area as described in labeling lists L601 and L602.
- Use labeling list L009 when labeling bundles or trays of such pieces.
- Prepare pieces claiming DNDC prices in separate bundles, sacks, or trays from any pieces not claiming DNDC prices.
All pieces in an ADC sack or tray are eligible for the DNDC discount if the ADC facility ZIP Code (as shown on Line 1 of the corresponding container label) is within the service area of the NDC or ASF at which the sack or tray is deposited, as described in labeling lists L601 and L602. All pieces in a palletized ADC bundle are eligible for DNDC prices if the ADC facility destination (determined by the “Label To” ZIP Code in Column B of labeling list L004) is within the service area of the NDC or ASF at which deposited according to L601 and L602.
Mailpieces in a mixed ADC bundle, sack, or tray can qualify for DNDC prices if the following standards are met:
- All pieces in the bundle, sack, or tray must destinate within the ASF or NDC service area as described in labeling lists L601 and L602.
- Use labeling list L009 when labeling bundles, sacks, or trays of such pieces.
- Prepare pieces claiming DNDC prices in separate bundles, sacks, or trays from any pieces not claiming DNDC prices.
For destination NDC/ASF containers, except as provided in labeling lists L601 and L602, sortation of machinable parcels to ASFs is optional but is required for the ASF mail to be eligible for DNDC prices. If machinable parcels are sorted under L601, except as noted in the L601 preamble, only mail for 3-digit ZIP Codes not served by an ASF (under L602) is eligible for DNDC prices.
Mailings deposited at a DNDC must be presented in vehicles compatible with NDC dock and yard operations.
Mailings may be deposited at the DNDC only if that facility is authorized (by Form 4410) to act as acceptance agent for the entry Post Office (where the meter license, precanceled stamp permit, or permit imprint authorization is held). Form 4410 is not required for plant-verified drop shipments.
For this standard, destination sectional center facility (DSCF) refers to the facilities listed in L002, Column C.
Pieces in a mailing that meet the standards in 2.0 and 4.0 are eligible for DSCF prices under either 4.2.1a. or 4.2.1b. below:
- When deposited at a DSCF or USPS-designated facility, and either:
- Placed in a tray labeled to a destination within the SCF’s service area, when all pieces in the tray are addressed for delivery within that SCF’s service area.
- Placed in an ADC or AADC tray labeled to a destination within the SCF’s service area, regardless of whether all pieces in the tray are addressed for delivery within that SCF’s service area.
- When entered and deposited at a DDU, addressed for delivery within that facility‘s service area, placed in a tray labeled to that DDU, and either:
- The pieces are prepared with simplified addresses under 602.3.2.
- The mailer holds a mailing permit at the DDU entry office and deposits only one mailing of fewer than 2,500 pieces per day.
Pieces in a mailing that meets the standards in 2.0 and 4.0 are eligible for the DSCF price, as follows:
- When deposited at a DSCF or USPS-designated facility, addressed for delivery within the DSCF’s service area, and placed in a sack or on a pallet labeled to the DSCF or to a destination within its service area. This includes sacks labeled to an ADC facility with the exact same service area as the DSCF.
- When prepared in 5-digit bundles and placed in or on a merged 5-digit scheme or merged 5-digit sack or pallet that is deposited at the destination delivery unit as defined in 5.1.
- DSCF prices apply to all pieces on or in a FSS Scheme or FSS Facility container when entered at a DSCF facility and any of the pieces on or in the container are addressed for delivery within that DSCF’s service area. DSCF prices also apply to high density and high density plus carrier route containers entered at a DFSS facility.
- When high density and high density plus pieces on a 5-digit or 5-digit scheme container contains FSS Scheme ZIPs under L006 and are entered at a Flat Sequencing System (FSS) facility, the remaining pieces that are not addressed for that facility’s FSS Scheme ZIP codes can claim the DSCF prices.
Pieces in a mailing that meets the standards in 2.0 and 4.0 are eligible for the DSCF price, as follows:
- When deposited at a DSCF or USPS-designated facility, addressed for delivery within the DSCF’s service area, and placed in a sack or on a pallet that is labeled to the DSCF or to a destination within its service area. Product Samples must be palletized under 245.12.5 and 705.8.10.3.
- When prepared in 5-digit bundles and placed on a 5-digit pallet or in a 5-digit scheme or 5-digit sack that is deposited at the destination delivery unit as defined in 5.1.
- When prepared and deposited under 705.6.3.
Mailings deposited at a DSCF must be presented in vehicles that are compatible with SCF dock and yard operations.
For this standard, destination delivery unit (DDU) refers to the facility designated by the USPS district drop shipment coordinator (for automation price USPS Marketing Mail) or the facility (Post Office, branch, station, etc.) where the carrier cases mail for delivery to the addresses on pieces in the mailing (for other USPS Marketing Mail).
Letter-size mailpieces are not eligible for a destination delivery unit (DDU) discount. Mailers may not pay ECR flat-size prices and claim the DDU discount for letter-size pieces. Mailers may deposit letter-size pieces that meet the standards in 2.0 and 5.0 at a DDU when:
- Those pieces are addressed for delivery within that facility‘s service area (enhanced carrier route only).
- The pieces are placed in properly prepared and labeled carrier route trays or 5-digit carrier routes trays, or on pallets under 705.8.0.
- The pieces are eligible for and claimed at a carrier route price.
Properly prepared Enhanced Carrier Route (ECR) flat-size pieces entered according to standards in 2.0 and 5.0 are eligible for the DDU price when deposited at a DDU and addressed for delivery within that facility‘s service area. Mailers must unload mail at DDUs according to standards in 2.6.9. Only pieces eligible for and claimed at ECR prices are eligible for the DDU discount. No other prices or discounts are available for pieces receiving the DDU discount. When mailings contain pieces claimed at more than one destination entry price, mailers must separate mail according to standards in 2.5.1.
Pieces in a mailing that meets the standards in 2.0 and 5.0 are eligible for the DDU price when deposited at a DDU, addressed for delivery within that facility‘s service area, and prepared as follows:
Pieces in a mailing that meets the standards in 2.0 and 5.0 are eligible for the DDU price when deposited at a DDU, addressed for delivery within that facility‘s service area, and prepared as follows:
- Marketing parcels eligible for and prepared as Product Samples in carrier route bundles, cartons, or sacks, and otherwise eligible for and claimed at a carrier route price under 243 and 245.
- One or more parcels in 5-digit containers.
Destination Flat Sequencing System (DFSS) refers to the facilities listed in L006.
DSCF prices apply to pieces deposited at a USPS-designated FSS processing site and correctly placed in or on a container labeled to a FSS scheme or FSS Facility processed by that site under labeling list L006 (Column B or Column C). These pieces must include a full delivery address and meet the physical standards for FSS machinability in 705.14.0.
