Overview
1.0 General Information for Mail Preparation
2.0 Sacks
3.0 Sack Labels
4.0 Preparing Destination Entry Parcel Select
5.0 Preparing Machinable Parcels
6.0 Preparing USPS Connect Local
All mailings at Parcel Select prices are subject to these general standards:
- Each mailing must meet the applicable standards in 201, 202, 253, 255, and 256.
- All pieces that are palletized must be prepared under 705.8.0.
USPS Connect Local pieces include no sorting requirements.
Presort is the process by which a mailer prepares mail so that it is sorted to at least the finest extent required for the price claimed. Generally, presort is performed sequentially, from the lowest (finest) level to the highest level, to destinations specified by standard and is completed at each level before the next level is prepared. Not all presort levels are applicable in all situations.
A mailing is a group of pieces within the same class of mail and, within the same processing category that may be sorted together and/or presented under a single minimum volume mailing.
Terms used for presort levels are defined as follows:
- 5-digit: the delivery address on all pieces includes the same 5-digit ZIP Code.
- 5-digit scheme (pallets and sacks): the ZIP Code in the delivery address on all pieces begins with one of the 5-digit ZIP Code zones processed by the USPS as a single scheme, as shown in L606.
- [7-14-24] SCF/RPDC: the separation includes pieces for two or more 3-digit areas served by the same sectional center facility (SCF)/regional processing and distribution center (RPDC) (see L051).
- [7-14-24] ASF/NDC/RPDC: all pieces are addressed for delivery in the service area of the same auxiliary service facility (ASF) or network distribution center (NDC)/regional processing and distribution center (RPDC) (see L601, L602, or L605).
For purposes of preparing mail:
- Pieces refers to individually addressed mailpieces. This definition also applies when pieces is used in eligibility standards. Quantities indicated for optional or required sortations always refer to pieces unless specifically excepted.
- A full sack is defined in the standards for the class and price claimed.
- A 5-digit scheme sort for parcels yields 5-digit scheme sacks or pallets for those 5-digit ZIP Codes listed in L606, and 5-digit sacks or pallets for other ZIP Codes. The 5-digit ZIP Codes in each scheme are treated as a single presort destination subject to a single minimum volume (if required), with no further separation by 5-digit ZIP Code required. Sacks or pallets prepared for a 5-digit scheme destination that contain pieces for only one of the schemed 5-digit ZIP Codes are still considered 5-digit scheme sorted and are labeled accordingly. The 5-digit scheme sort is always optional, including when 5-digit sortation is required for price eligibility. The 5-digit scheme sort need not be used for all possible 5-digit scheme sorts.
- The required at [quantity] instruction (e.g., “required at 7 pieces”) means that the particular unit must be prepared for the corresponding presort level whenever the specified quantity of mail is reached or exceeded. Containers may contain more than the specified required at quantity up to the applicable maximum physical size. Subject to applicable price eligibility standards, smaller quantities may be prepared only if permitted. Where specified by standard, required preparation applies only if the mailer chooses to qualify for the corresponding price.
- The optional at [quantity] instruction means that the particular unit may be prepared for the corresponding presort level whenever the specified quantity of mail is reached or exceeded. Containers may contain more than the specified optional at quantity up to the applicable maximum physical size. Smaller quantities may be prepared only if permitted by applicable price eligibility standards. Standards for quantities with which preparation is optional are often followed by standards for larger quantities with which preparation is required.
- Entry [facility] (or origin [facility]) refers to the USPS mail-processing facility (e.g., “entry NDC/RPDC”) that serves the Post Office where the mailer entered the mail. If the Post Office where the mail is entered does not serve the mailer’s location (e.g., for plant-verified drop shipment), the Post Office of entry determines the entry facility. The following apply:
- Entry SCF/RPDC includes both single-3-digit and multi-3-digit SCFs.
- Entry NDC/RPDC includes subordinate ASFs unless otherwise specified.
- [7-14-24] An overflow sack for Parcel Select DSCF/DRPDC mail is a 5-digit scheme or 5-digit sack prepared with fewer than 7 pieces after all other sacks for that same 5-digit scheme or 5-digit ZIP Code area are prepared with 7 or more pieces per sack as specified in 4.2. If all of the mail is sacked under 4.0, only one overflow sack is permitted for each 5-digit scheme or 5-digit ZIP Code. If a mailing is prepared on pallets, remaining pieces of Parcel Select mail may be prepared in one or more 5-digit scheme or 5-digit overflow sacks only after one or more 5-digit scheme or 5-digit pallets are prepared to meet the minimum pallet requirement specified in 705.8.0. Pieces in overflow sacks qualify for the Parcel Select DSCF prices.
- [7-14-24] An overflow pallet in a Parcel Select DSCF/DRPDC mailing is a 5-digit scheme or 5-digit pallet containing pieces that remain after one or more 5-digit scheme or 5-digit pallets have been prepared to meet the minimum-pallet requirement specified in 705.8.0. Only one overflow pallet per 5-digit scheme or 5-digit ZIP Code area is permitted for Parcel Select DSCF/DRPDC mail palletized under 705.8.0. Pieces on overflow pallets qualify for the DNDC rates
- A “logical” presort destination represents the total number of pieces that are eligible for a specific presort level based on the required sortation, but which might not be contained in a single bundle or in a single container (sack or pallet) due to applicable preparation requirements or the size of the individual pieces.
Each piece in a Parcel Select mailing must bear a price marking under 202.3.7.2. Markings must appear in either the postage area described in 202.3.7, or in the address area on the line directly above or two lines above the address if the marking appears alone (when no other information appears on that line).
See 203.6.0 for sack standards.
Sack labels are subject to the standards in 203.6.0.
4.1 [7-14-24] Preparing Destination Delivery Unit (DDU) or Sorting and Delivery Center (S&DC) Parcel Select
[7-14-24] A destination delivery unit (DDU) or sorting and delivery center (DS&DC) is a facility that delivers to the addresses on the deposited pieces in a destination-entry Parcel Select mailing. Refer to the Drop Shipment Product available at the USPS FAST Web site: https://fast.usps.com to determine the location of a 5-digit delivery facility. Use L606 only for mailings prepared using the optional 5-digit scheme sort.
Pieces must meet the applicable standards in 4.0 and the following criteria:
- Must be part of a mailing of at least 50 Parcel Select pieces.
- Pieces must be entered by the mailer at the postal facility where the carrier delivers the parcels (delivery unit) as defined in 253.4.1.1.
- [7-14-24] If the delivery unit serves more than one 5-digit ZIP Code, the pieces must be separated by 5-digit ZIP Code when unloaded, unless prepared as optional 5-digit scheme sacks or pallets. Refer to the Drop Shipment Product available at the USPS FAST Web site: https://fast.usps.com to determine the location of the delivery unit or S&DC, whether it serves more than one 5-digit ZIP Code, and whether it can handle pallets.
[7-14-24] There are no minimum sacking or pallet preparation standards. DDU pieces may be bedloaded, sacked, placed directly on pallets, or placed in pallet boxes on pallets. DDU or DS&DC pieces may be bedloaded, sacked, placed directly on pallets, or placed in pallet boxes on pallets.
Sacked mail must be labeled as follows:
- 5-digit scheme: Line 1, L606; Line 2, “PSVC PARCELS 5D SCH.”
- 5-digit: Line 1, city, state, and 5-digit ZIP Code on mail (see 203.5.11 for overseas military mail); Line 2 “PSVC PARCELS 5D.”
A destination Hub (DHub) includes all facilities in L014.
Pieces must meet the applicable standards in 4.0 and the following criteria:
- Must be part of a mailing of at least 50 Parcel Select pieces.
- DHub pieces must be for the same Hub area under L014.
- Sorted to optional 5-digit scheme destinations under L606, Column B, 5-digit destinations, either in sacks or directly on pallets or in pallet boxes. Mailers must enter the pieces at the designated Hub, under L014 that serves the 5-digit ZIP Code destinations of the pieces. The DHub price is not available for palletized mail for facilities that are unable to handle palletized mailings. Refer to the Drop Shipment Product available at the USPS FAST website (https://fast.usps.com) to determine if the facility serving the 5-digit destination can handle pallets.
Sacking requirements for DHub entry include the following:
- Only 5-digit scheme and 5-digit sacks are permitted.
- Each 5-digit scheme and 5-digit sack must contain a minimum of seven pieces. Machinable and nonmachinable pieces may be combined in the same sack to meet this requirement. One overflow sack per 5-digit ZIP Code is permitted (no piece minimum).
- 5-digit scheme sack labeling:
- Line 1: Use L606, Column B;
- Line 2: Use “PSVC PARCELS 5D SCH.”
- 5-digit sack labeling:
- Line 1: Use city, state, and 5-digit ZIP Code on mail. (See 203.5.11 for overseas military mail.)
- Line 2: Use “PSVC PARCELS 5D.”
4.3 [7-14-24] Preparing Destination SCF (DSCF)/Destination Regional Processing and Distribution Center (DRPDC) Parcel Select
[7-14-24] A destination sectional center facility (DSCF)/destination regional processing and distribution center (DRPDC) includes all facilities in L051. Mailers may be redirected to deposit DSCF/DRPDC mail at another USPS-designated facility.
Pieces must meet the applicable standards in 4.0 and the following criteria:
- Must be part of a mailing of at least 50 Parcel Select pieces.
- DSCF pieces must be for the same SCF area under L051.
- Sorted to optional 5-digit scheme destinations under L606, Column B, 5-digit destinations, or SCF for machinable parcels under L051, either in sacks or directly on pallets or in pallet boxes. Mailers must enter the pieces at the designated SCF, under L051 that serves the 5-digit ZIP Code destinations of the pieces. The DSCF price is not available for palletized mail for facilities that are unable to handle palletized mailings. Refer to the Drop Shipment Product available at the USPS FAST Web Site: https://fast.usps.com to determine if the facility serving the 5-digit destination can handle pallets.
- Any remaining nonmachinable parcels (as defined in 201.8.5.2) sorted to 3-digit ZIP Code prefixes in L002, Column C. Machinable parcels may not be sorted to the 3-digit level.
[7-14-24] Sacking requirements for DSCF/DRPDC entry:
- Only 5-digit scheme, 5-digit, and SCF sacks are permitted.
- Each 5-digit scheme and 5-digit sack must contain a minimum of seven pieces. Machinable and nonmachinable pieces may be combined in the same sack to meet this requirement. One overflow sack per 5-digit ZIP Code is permitted (no piece minimum).
- 5-digit scheme sack labeling: Line 1, use L606, Column B; for Line 2, “PSVC PARCELS 5D SCH.”
- 5-digit sack labeling: Line 1, use city, state, and 5-digit ZIP Code on mail (see 203.5.11 for overseas military mail); for Line 2, “PSVC PARCELS 5D.”
- Each SCF sack must contain a minimum of seven pieces. One overflow sack per SCF is permitted (no piece minimum).
- SCF sack labeling: Line 1, use L051; for Line 2, “PSVC PARCELS SCF.”
- 3-digit nonmachinable sack labeling: Line 1, use L051; for Line 2, “PSVC IRREG 3D.”
- See 705.8.0 for option to place 5-digit scheme and 5-digit DSCF sacks, SCF sacks, and 3-digit nonmachinable sacks on an SCF pallet.
4.4 [7-14-24] Preparing Destination NDC (DNDC)/Destination RPDC (DRPDC) Parcel Select
[7-14-24] A destination network distribution center (DNDC)/destination regional processing and distribution center (DRPDC) includes all network distribution centers (NDCs)/regional processing and distribution centers (RPDCs) and auxiliary service facilities (ASFs)/regional processing and distribution centers (RPDCs) under L601 and L602, and designated sectional center facilities (SCFs)/regional processing and distribution centers (RPDC) under 256.2.17.
Pieces must meet the applicable standards in 4.0 and the following criteria:
- Must be part of a mailing of at least 50 Parcel Select pieces.
- [7-14-24] Pieces must be part of a Parcel Select mailing that is deposited at a NDC/RPDC or ASF/RPDC under L601 or L602.
- [7-14-24] Except as provided in L601 and L602, pieces deposited at each NDC/RPDC or ASF/RPDC must be addressed for delivery within the ZIP Code range of that facility.
- [7-14-24] Pieces must be within a ZIP Code eligible for DNDC prices as noted in L601 and L602 and, if sacked or palletized, must be prepared according to 4.0, and 705.8.0. Mail meeting the additional criteria in 256.2.16 or 256.2.17 may be deposited at an SCF/RPDC.
DNDC mailing (if not bedloaded), must be prepared as follows:
- [7-14-24] DNDC/DRPDC machinable parcels must be sacked under 5.0 or prepared on pallets under 705.8.0.
- [7-14-24][1-21-24] DNDC/DRPDC nonmachinable parcels that each weigh 25 pounds or less must be sacked under 5.0, if the parcels do not contain perishables and the size of the parcels allows a sack to hold at least two pieces. DNDC/DRPDC nonmachinable parcels that cannot be sacked in this manner or that weigh more than 25 pounds must be transported as outside (unsacked) pieces. If USPS authorized in advance, DNDC/DRPDC nonmachinable parcels may be palletized.
Parcel Select machinable parcels must meet the physical standards in 201.7.5.
Pieces must meet the applicable standards in 4.0 and the following criteria:
- Must be part of a mailing of at least 50 Parcel Select pieces, except there is no minimum volume for nonpresorted parcels when postage is paid using PC Postage.
- Each piece must be machinable and bear a barcode.
[7-14-24] Sacking is not required, however mailers may opt to prepare Parcel Select machinable parcels in sacks under 2.0 or on pallets under 705.8.0.
Sack size, preparation sequence, and Line 1 labeling:
- 5-digit scheme: optional (minimum of 10 pieces or 20 pounds); for Line 1, use L606, Column B.
- 5-digit: required (minimum of 10 pieces or 20 pounds); for Line 1, use city, state and 5-digit ZIP Code destination of pieces (see 3.0. for military mail).
- [7-14-24] SCF/RPDC: optional (minimum of 10 pieces or 20 pounds); for Line 1, use L051.
- [7-14-24] ASF/RPDC: optional; allowed only for mail deposited at an ASF to claim the DNDC price (minimum of 10 pieces or 20 pounds); for Line 1, use L602, Column B.
- [7-14-24] NDC/RPDC: required (minimum of 10 pieces or 20 pounds); for Line 1, use L601, Column B.
Line 2:
- 5-digit scheme: “PSVC MACH 5D SCHEME” or “PSVC MACH 5D SCH.”
- 5-digit: “PSVC MACH 5D.”
- SCF: “PSVC MACH SCF.”
- ASF: “PSVC MACH ASF.”
- NDC: “PSVC MACH NDC.”
USPS Connect Local Flat Rate packaging provided by USPS must be used only for USPS Connect Local mailings.
The container flaps must close within the normal folds in a sealed USPS Connect Local Flat Rate bag or box. Tape may be applied to the flaps and seams to reinforce the container, provided that the container’s design is not enlarged by opening the sides and the container is not reconstructed in any way.
