256 Enter and Deposit

Overview

1.0 Verification

2.0 Deposit

3.0 Pickup on Demand Service

1.0 Verification

1.1 Verification and Entry

All presort, destination entry, and barcoded mailings must be presented for verification and acceptance at the Post Office where the permit or license is held. All such mailings must be deposited at locations and times specified by the postmaster or designee at the office that verifies and accepts the mailing. Plant-verified drop shipment (PVDS) mailings must be presented for verification, acceptance, and entry under 705.17.0. Plant-loaded mailings must be presented as specified by the applicable standards and the plant- load agreement. Metered mail may be deposited at other than the licensing Post Office only as permitted under 705.19.0.

1.2 Office of Mailing

1.2.1 Parcel Select

[7-14-24] Parcel Select must be mailed at the Post Office from which the zone-based postage was computed, except under 1.3.

1.2.2 USPS Connect Local

USPS Connect Local pieces must be mailed at the local Post Office designated by the 5-digit ZIP Code destination.

1.3 [7-14-24] NDC/RPDC Acceptance

A mailer may present Parcel Select at an NDC/RPDC for acceptance if:

1. Metered postage is paid through a postage meter licensed at the NDC/RPDC parent Post Office, or permit-imprint postage is paid through an advance deposit account at the NDC/RPDC parent Post Office or another Post Office in the NDC/RPDC service area, unless otherwise permitted by standard.
2. The NDC/RPDC is authorized via PS Form 4410, Authorization for NDC Acceptance, to act as acceptance agent for the entry Post Office.

1.4 Drop Shipment Information

Essential information for entering drop shipment Parcel Select mailings at specific postal facilities can be found in the Drop Shipment Product available at the USPS FAST Web site: https://fast.usps.com.

2.0 Deposit

2.1 Bedloaded Parcels

[7-14-24] A mailer may present bedloaded DNDC/RPDC parcels if the mailer‘s vehicle has a road-to-bed height of 50 (±2) inches. If applicable, the mail to be entered at different destinations must be separated to prevent mixing of mailings for deposit at different destinations. DNDC/DRPDC mailings may be bedloaded for deposit at NDCs/ASFs/RPDCs, and DDU or DS&DC mailings may be bedloaded for deposit at DDUs or DS&DCs. Refer to the Drop Shipment Product available at the USPS FAST Web site: https://fast.usps.com to determine dock requirements for a DDU or DS&DC facility.

2.2 Containers

[7-14-24] DNDC/DRPDC mailings (if not bedloaded), DDU or DS&DC mailings (if not bedloaded), and all DHub, and DSCF/DRPDC mailings must be prepared as follows:

1. Machinable parcels for which a DNDC, DSCF, DHub, or DDU price is claimed must be sacked under 255.4.0, or prepared on pallets under 705.8.0.
2. [7-14-24][1-21-24] For DNDC price, nonmachinable parcels that each weigh 25 pounds or less must be sacked under 255.4.0, if the parcels do not contain perishables and the size of the parcels allows a sack to hold at least two pieces. DNDC/DRPDC nonmachinable parcels that cannot be sacked in this manner or that weigh more than 25 pounds must be transported as outside (unsacked) pieces. If USPS-authorized in advance, DNDC/DRPDC nonmachinable parcels may be palletized.
3. [7-14-24] For DSCF/DRPDC, if sacked under 255.4.0, parcels must contain at least 7 pieces per sack. If the sack is overflow from a 5-digit scheme, 5-digit, or 3-digit sack that contains at least 7 pieces, then a sack may contain less than 7 pieces. For DSCF/DRPDC, if sacked under 705.8.0 as overflow from a 5-digit scheme, 5-digit, or 3-digit pallet that meets the applicable pallet minimum, the sack may contain any number of pieces. Machinable and nonmachinable pieces may be included in the same sack. For DSCF, if sacked under 255.4.0, must contain at least seven pieces per sack. If the sack is overflow from a 5-digit scheme, 5-digit, or 3-digit sack that contains at least seven pieces, then a sack may contain fewer than seven pieces. For DSCF, if sacked under 705.8.0 as overflow from a 5-digit scheme, 5-digit, or 3-digit pallet that meets the applicable pallet minimum, may contain any number of pieces. Machinable and nonmachinable pieces may be included in the same sack.
4. [7-13-24] For DSCF/DRPDC, 5-digit scheme, 5-digit, SCF/RPDC, and 3-digit sacks may be bedloaded or be placed on SCF/RPDC pallets that are labeled and otherwise prepared under 705.8.0.
5. [7-14-24] For DSCF/DRPDC and DDU or DS&DC, nonmachinable parcels may be palletized (including pallet boxes on pallets). Nonmachinable parcels may be combined with machinable parcels on 5-digit scheme, 5-digit, and 3-digit pallets (including pallet boxes on pallets) claimed at DSCF or DDU prices under 705.8.0.
6. [7-14-24] For DDU or DS&DC, there are no minimums for sacks, pallets, or pallet boxes on pallets. DDU or DS&DC mail must be separated by 5-digit scheme and 5-digit (even if bedloaded) and, if placed in sacks or on pallets (including boxes on pallets), it must be properly labeled to the 5-digit scheme or 5-digit destination. Machinable and nonmachinable pieces may be combined in 5-digit scheme and 5-digit sacks or on 5-digit scheme and 5-digit pallets (including pallet boxes).
7. For DHub, 5-digit scheme and 5-digit sacks may be bedloaded or be placed on DHub pallets that are labeled and otherwise prepared under 705.8.0.

2.3 Mailer Transport

The mailer must transport the PVDS mailing from the place where it was verified to the destination postal facility (NDC, SCF, or delivery unit), appropriate to the mailing and the price claimed.

2.4 Freight

Drop shipments are freight until deposited, and accepted, as mail at the destination facility. The mailer may request use of a numbered PVDS band seal to secure mailer vehicles transporting plant-verified drop shipments.

2.5 Mail Separation and Presentation of Destination Entry Mailings

Destination entry mail must be presented and verified under a PVDS system (705.17.0), presented for acceptance at a BMEU located at a destination postal facility; or presented for acceptance at an origin DMU or BMEU, and then prepared under Priority Mail Express Open and Distribute or Priority Mail Open and Distribute standards (705.18.0). Mailers may deposit only PVDS and eVS mailings at a destination delivery unit not co-located with a Post Office or other Postal Service facility with a business mail entry unit. If authorized under 705.7.0, mailers may commingle Parcel Select with other approved parcel mail using eVS. Mailers presenting destination entry mailings to the Postal Service must meet the following requirements:

1. [7=14-24] Mark each DNDC/DRPDC, DSCF/DRPDC, DHub, or DDU or DS&DC Parcel Select piece as “Parcel Select,” according to 202.3.7.2. If eVS is used, include the marking “eVS” on each piece as described in 604.5.0.
2. Ensure that all PVDS mailings are accompanied by a completed Form 8125, 8125-C, or 8125-CD. eVS mailings do not require these forms.
3. Separate each mailing from other mailings for verification. For PVDS mailings and eVS mailings, separate mailings for deposit at different destination Postal Service facilities.
4. Separate mail from freight transported on the same vehicle.
5. If Periodicals mail is on the same vehicle as Parcel Select, load the Periodicals mail toward the tail of the vehicle.

2.6 [7-14-24] NDC/RPDC as Agent

The DNDC/DRPDC may verify and accept mail if authorized by Form 4410 to act as agent for the parent Post Office where the mailer‘s account or license is held.

2.7 Appointments

Appointments must be made for destination entry mail as follows:

1. [7-14-24] Except as provided under 2.7b or for a local mailer and mailings of perishable commodities (601.8.0) under 2.8, the following apply:
1. Appointments for deposit of destination-entry mail at NDCs/RPDCs, ASFs/RPDCs, and SCFs/RPDCs must be scheduled through the appropriate drop-shipment appointment control center at least one business day in advance.
2. All appointments for NDC/RPDC loads must be scheduled by the appropriate NDC/RPDC control center. Appointments for SCFs/RPDCs and ASFs/RPDCs must be scheduled through the appropriate district control center.
3. Same-day appointments may be granted by a drop-shipment control center based on a telephone request.
4. Appointments may be made up to and including 30 calendar days before the desired appointment date.
5. Mailers must comply with the scheduled mail-deposit time and location.
6. To cancel an appointment, the mailer must notify the appropriate drop-shipment control center at least one business day before the scheduled appointment time.
2. [7-14-24] For deposit of DDU or DS&DC and DHUB mailings, an appointment must be made by contacting the DDU or DS&DC, or through FAST, at fast.usps.com, at least 24 hours in advance. All information must be provided that the FAST appointment system requires regarding a mailing.
3. For deposit of DDU and DHUB mailings, an appointment must be made by contacting the DDU or through FAST, available at fast.usps.com, at least 24 hours in advance. To cancel an appointment, the mailer must provide notification through the applicable appointment method at least one day before the scheduled appointment. Recurring (standing) appointments will be allowed if shipment frequency is weekly or more often.

2.8 Exception to Scheduling Standard

Exceptions are as follows:

1. [7-14-24] The scheduling standard in 2.7, does not apply when a mailer deposits mailings for verification and acceptance at the local Post Office serving the facility where the mail was prepared, if the mailings are not verified under a plant load authorization or plant-verified drop shipment postage payment system authorization. Under this exception, the mailer may claim the DNDC prices for mailings or portions of such mailings deposited at the local Post Office if the local Post Office is the DNDC/ASF/DRPDC or designated SCF/RPDC that meets the application standards.
2. Exceptions to the scheduling standard are made for shipments of products recognized by USPS as perishables under 601.8.0. While an appointment is not required for shipments of perishables, the destination facility must be notified at least 24 hours in advance of deposit to facilitate timely handling of the load.

2.9 Redirection by USPS

[7-14-24] A mailer may be directed to transport destination-entry mailings to a facility other than the designated DDU or DS&DC, SCF/RPDC, or NDC/RPDC due to facility restrictions, building expansions, peak-season mail volumes, or emergency constraints.

2.10 Advance Scheduling

Mailers must schedule appointments for deposit of destination entry mail under 2.7 and the conditions below. When making an appointment, or as soon as available, the mailer must provide the following information:

1. Mailer‘s name and address and telephone number of the mailer‘s agent or local contact.
2. [7-14-24] Description of what is being mailed, product name, number of mailings, volume of mail, how prepared, and whether containerized (e.g., pallets). For DDU or DS&DC entries, the mailer also must provide the 5-digit ZIP Code(s) of the mail being deposited.
3. Where the mailing was verified.
4. Postage payment method.
5. Requested date and destination facility for mailing.
6. Vehicle identification number, size, and type.

2.11 Deposit Conditions

Deposit of mail also is subject to these conditions:

1. [7-14-24] a. Destination facilities may refuse mailings that are unscheduled or late (i.e., if vehicles arrive more than 2 hours after the scheduled appointment at ASFs/RPDCs, NDCs/RPDCs, SCFs/RPDCs, or DHubs, and more than 20 minutes late at delivery units). If a mailing is refused, a mailer is permitted to make a new appointment.
2. [7-14-24] The NDC/RPDC may approve drop and pick procedures only for Parcel Select mailers. The NDC/RPDC specifies the time limit for vehicle retrieval.

2.12 Recurring Appointments

Recurring refers to a drop shipment that is delivered to a destination office with a frequency of at least once a week on the same time and day(s). Mailings must be comparable product in terms of size, volume, and containerization (pallets, pallet boxes, etc.). A request to establish recurring appointments must be written on company letterhead to the postal facility manager/postmaster. The drop shipment appointment control office/postmaster will respond to all requests within 10 days. Recurring appointments may be made for a period not to exceed 6 months. Thereafter, a new application must be submitted to ensure that up-to-date mailer information is on file. Written request for an additional 6 months may be made within 60 days prior to the expiration of a current arrangement. Failure to adhere to scheduled appointments or other abuse of the procedures will result in revocation of recurring appointment privileges. Requests for recurring appointments must include the following:

1. Name, address, and telephone number of the mailer.
2. Transportation agent‘s name (contact person) and telephone number(s).
3. Mail volume and preparation (sacks/parcels).
4. Containerization.
5. Size and type of trailer(s) transporting mail.
6. Frequency/schedule.

2.13 Vehicle Unloading

Unloading of destination entry mailings is subject to these conditions:

1. [7-14-24] USPS unloads properly prepared containerized loads (e.g., pallets) at NDCs/RPDCs, ASFs/RPDCs, SCFs/RPDCs, and Hubs. USPS does not unload or permit the mailer (or mailer agent) to unload palletized loads that are unstable or severely leaning or that have otherwise not maintained their integrity in transit.
2. [7-14-24] The driver must unload bedloaded shipments within 8 hours of arrival at NDCs/RPDCs, ASFs/RPDCs, SCFs/RPDCs, and Hubs. Combination containerized and bedloaded drop shipment mailings are classified as bedloaded shipments for unload times. USPS may help unload. .
3. [7-14-24] At destination delivery units (DDUs) or sorting and delivery centers (DS&DCs), drivers must unload all mail, whether bedloaded, sacked, or palletized (including boxes on pallets), within 1 hour of arrival. Unloading procedures are as follows:
1. If pallets or pallet boxes are stacked, drivers must unload, unstrap, and unstack them.
2. When drivers unload containerized mail, delivery unit employees may require drivers to place the containers together by 5-digit ZIP Codes or 5-digit schemes.
3. When mail is not containerized or on pallets, drivers must place the mail into containers as delivery unit employees specify. Delivery unit employees may require drivers to place mail into containers to separate mail by 5-digit ZIP Codes or 5-digit schemes.
4. At DDUs that cannot handle pallets, drivers must unload any mail from pallets and place it into containers as delivery unit employees specify.
4. When driver unloading is required, the driver or assistant must stay with and continue to unload the vehicle once at the dock.
5. The driver must remove the vehicle from USPS property after unloading. The driver and assistant are not permitted in USPS facilities except the dock and designated driver rest area.

2.14 Demurrage

The USPS is not responsible for demurrage or detention charges incurred by a mailer who presents destination entry mailings.

2.15 Appeals

Mailers who believe that they are denied equitable treatment may appeal to the manager, Customer Service (district), responsible for the destination postal facility.

2.16 Documentation

A postage statement must accompany each destination entry mailing. Any other documentation must be submitted as required by the standards for the price claimed or the postage payment method used.

2.17 [7-14-24] DNDC/RPDC Parcel Select—Acceptance at Designated SCF/RPDC-USPS Benefit

A mailing that is otherwise eligible for DNDC prices may be deposited, and accepted, at a USPS-designated SCF/RPDC when it benefits USPS and:

1. The mailing contains only machinable parcels prepared in 5-digit scheme and 5-digit sacks, pallets, or containers and nonmachinable parcels prepared under 2.2.
2. [7-14-24] All DNDC/DRPDC parcels are for delivery within the service area of the SCF/RPDC where the mailer deposited them.
3. [7-14-24] Postage on all parcels deposited at the SCF/RPDC is computed using the zone chart for that postal facility.
4. The marking required by 255.1.8, contains the correct information.
5. [7-14-24] The mailer is directed to deposit the mailing at that SCF/RPDC by the district control center in whose area is located the NDC/RPDC or ASF/RPDC where the DNDC/DRPDC parcels would otherwise be deposited.

2.18 [7-14-24] DNDC/DRPDC Parcel Select — Acceptance at Designated SCF/RPDC

Mailers may deposit parcels otherwise eligible for the DNDC prices at an SCF/RPDC that USPS designated for destination ZIP Codes listed in labeling list L607. The following standards apply:

1. Eligible machinable parcels are restricted to the ZIP Codes listed in L607.
2. [1-21-24] Bound Printed Matter machinable parcels under 266.4.4 and USPS Marketing Mail machinable parcels under 705.6.0 may be included.
3. [7-14-24] Mailers must prepare parcels on 3-digit pallets or in 3-digit pallet boxes, or unload and physically separate the parcels into containers that the destination facility specified. Parcels are eligible for the applicable DNDC/DRPDC entry.
4. [7-14-24] All DNDC/DRPDC parcels must be for delivery within the service area of the SCF/RPDC where the mailer deposited them.
5. [7-14-24] Postage on all parcels deposited at the SCF/RPDC is computed using the zone chart for that Postal Service facility.
6. Parcels must contain the correct marking in 255.1.8.

3.0 Pickup on Demand Service

Pickup on Demand service (507.7.0) is available for a fee only from designated ZIP Codes and can be requested online at www.usps.com.